In-stock products

DESIGNED FOR SCHUMACHER TIRES - MAY FIT OTHERS

-TYPE: FOAMS

-SCALE: 1/10TH

-4WD/2WD: SEE OPTIONS

-WIDTH: SEE OPTIONS DETAILS

-TYRE BEAD/RIM SIZE: 2.2INCH / 54MM DIAMETER

-HARDNESS: SEE OPTIONS

This motor is similar in spec to Tamiya's 53068 Sport Tune motor but with a 16400 RPM speed at typical voltage.

It has been engineered to work with all Tamiya speed controllers without needing any changes other than swapping the motor over - most other brands of motor require you to change the speed controller at the same time.

It gives a moderate speed and torque increase over the standard kit motor, without making any significant effect to the run time per battery.

Nominal voltage 6 V
Voltage range 4,8-8,4 V
Rotational speed 28.000 rpm
Current consumption 1.95 A with max. efficiency: efficiency 61.1 % .

Rotational speed 16.400 rpm
Torque 1.69 Ncm
Current consumption 8.7 A
Output 28.8 W

For mixing X Colours and other paints.

Replace or upgrade to a fullset of bearings for your car for a smoother and more efficient running car! No more looking up all the sizes you need and potentially getting the wrong ones with these custom sets for specific cars!

Feature:

• For : Tamiya M08
• Material : Steel
• Shielding: Rubber

Include:

Total Bearing (22 pcs)

• YB6006B  (3x7x3mm) (2 pcs)
• YB6009B  (4x8x3mm) (3 pcs)
• YB6011B  (5x8x2.5mm) (5 pcs)
• YB6013B  (5x10x4mm) (8 pcs)
• YB6014B  (5x11x4mm) (2 pcs)
• YB6023B  (10x15x4mm) (2 pcs)

NOTICE! BODY ONLY WITH STICKERS. CAR IS NOT INCLUDED. PAINT IS SOLD SEPERATELY. PLEASE USE POLYCARBONATE SPRAYS. 

Phat Bodies '300R' Lotus Elise replica bodyshell for the MTC Mini touring car class and Tamiya M chassis.

Also fits most 1/12th MTC and LMP chassis

Race tuned aerodynamics with a extended front splitter and large high downforce rear wing help keep this body planted on the track. With high clearance speed bumps on the bonnet help the sleek body sit lower on any chassis.

Pictured on a Xpress XM1S chassis

available in 210mm wheelbase only

Made from super high quality 0.75mm Lexan polycarbonate

Bodyshell comes CLEAR, so will require cutting, trimming and painting to fit.
The bodyshell in the photo's has been painted to represent the finished item.

Comes with -
Crystal clear 0.75mm lexan polycarbonate bodyshell
High downforce race tuned rear wing
"Phat" stickers
Window and light masks
Over spray film

Note - bodyshell comes clear, painted example is for advertising purposes only

Balance charge extension lead

Core RC - Serrated M4 Steel Wheel Nuts feature sharp serrations on the steel face that's sits against the wheel making lost wheel nuts a thing of the past. Never face the embarrassment of losing a big final as your wheel rolls down the track again.

SKY RC Set-Up System for 1/10 touring cars. It is designed for precisely measure and set your cars’ camber, toe, steering throw. Also has caster measuring display.

A well-adjusted car will give better performance on track and will help you win races!

Includes;
4x Blue measurement gauges for each corner.
1x Toe gauge

*COMES WITH CARRY CASE*

RADIO-BATTERY-CHARGER INCLUDED!

Comes with Drift Wheels and Tyres -Swop for Carpet Tyres and Race!

Take to the streets with FTX’s new Banzai drift chassis. Modelled around the hugely popular FTX Vantage and Carnage platform, the Banzai brings Japanese drift styling to the entry level Ready-To-Run arena.

Featuring a 4wd shaft driven design with front and rear metal-geared differentials, the Banzai is 99% complete from the box. Blue anodized aluminium components add a little style to the chassis along with the functionality of oil filled adjustable shock absorbers, front CVA universal driveshafts, ball bearings, adjustable suspension turnbuckles for tuning and a centre drive slipper to protect the transmission.

A waterproof electronic speed control, servo and receiver allow for use in a wide range of conditions and the 2.4ghz radio provides interference free signal no matter where you are.

Topped off and finished with an S15 style pre-printed drift body and a hard compound drift tyre on scale finish wheels, the Banzai is the perfect introduction to sideways street action!

FEATURES

• RTR with Etronix 2.4ghz Radio System
• Waterproof receiver
• Waterproof brushed motor speed control
• Waterproof steering servo
• 550 brushed motor
• Voltz 1800mah 7.2v NiMh battery
• Wall charger for battery
• Moulded tub chassis
• 4wd shaft drive with slipper system
• Big bore oil filled adjustable shocks
• Gearbox metal crown and pinion gear
• Front universal driveshafts
• Adjustable turnbuckles
• Adjustable suspension(droop, camber, toe-in & wheelbase)
• Foam front bumper
• Scale finished wheels
• Drift tyres

SPECIFICATIONS

Length: 440mm
Width: 195mm
Height: 130mm
Wheelbase: 255mm - 256mm
Front Tyre: 24 x 60mm
Rear Tyre: 24 x 60mm
Gear Ratio: 6.5:1

Joysway Mad Shark V3-Racebird Li-ion 7.4V-900 Battery (XT60)

Replace the kit-standard plastic gears (GV1 and GV2) with these metal gears to allow your car to handle tough driving conditions such as rally driving with a high-powered motor.

2200mah Pink Power Nimh Battery & 7.2v USB 1Amp charger. 2.2hours approx charge time. 

To use onb Tamiya Car - Simply buy a Male Deans to Tamiya Female adaptor - sold on our store.

EP Batteries have a great reputation for providing high quality batteries which are safe and reliable, these 4.8v 4 cell packs are no different!
Specially designed for banger racing or other types of 1/12th oval cars this 4 cell NiMH pack is available with 5000 mAh.


4.8v NiMH Stick pack, 5000mAh
Supplied with quality flexible silicone wire a T type connector.
94x47.5x24.5mm
294g

asy Operation
This ESC is specially designed for new beginners and intermediate modelers; it not only carries forward the outstanding quality of HOBBYWING products but simplifies the operation.

Applicable to All Weather Conditions
The waterproof and dust-proof design allows the QUICRUN WP-1060 Brushed to be used in all weather conditions without any issue of damage caused to the ESC from water or dust.

High Reliability & Durability
Reliable hardware combined with advanced software technology allows the QUICRUN WP 1060 Brushed to not only provide high power output but also overload protection of the ESC circuit.

Easy to Use
This ESC features auto throttle calibration and parameter setting via jump caps is easy-to-use, especially applicable to new beginners.

Wide Application
This ESC is designed for 1/10th scale touring cars, buggies, short-course trucks, monster trucks, trucks, crawlers and tanks.

- Waterproof
- Cont./Peak Current - 60A/360A
- Input - 2-3S LiPo/6-9 Cells NiMH
- BEC Output - Switch Mode:6V/3A
- Input Wires - Red-16AWG-100mm*1/Black-16AWG-100mm*1
- Output Wires - Blue-16AWG-100mm*1/Yellow-16AWG-100mm*1
- Input Connectors - Big-sized TAMIYA Connector
- Output Connectors - 4.0 Bullet Connectors (Female)
- Size - 36.5x32.0x18.0mm
- Weight - 39g
- Motors - Brushed Motors 2S - 12T limit, 3S - 18T limit
- Vehicles - 1/10th Touring Cars/Buggies/Trucks/Rock Crawlers

FASTRAX TEAM TOOL CURVED

*CLEARANCE* Extreme Bashing LiPo 3S 11.1V-8000-100C Multi 157x47x34

Product description