RC Vehicles

Two decal sheets! Red & Blue decal sheets are included!

Features

• Full Matte Black body colour.
• Two decal sheets included (Red & Blue) self-apply decal.
• Driver & navigator models installed.
• Full size spare tyre included.
• Four Wheels Drive.

ESC:   BEAST SL G2 80A

• Water-Proof and Dust-Proof for All Weather.
• 32-bit Microprocessor Can Support More Powerful Processing Capability and More Accurate Motor Output.
• Excellent Start-up, Acceleration and Linearity Features.
• Built-In Capacitor Module.
• Low Voltage Cut-Off Protection forLi-Po and NiMH Battery.
• Over-Heat Protection and Throttle Signal Loss Protection.

Motor:

• Powerful 3660 4000kv Brushless Motor.

 Servo:

• 12Kg-cm Metal Gear Servo (By Savox).
• 4.8V - 0.26 sec/60° 10.0 kg-cm.
• 6.0V - 0.23 sec/60° 12.0 kg-cm.
• 25T Horn Gear Spline.

Radio System:

• AMP 30 Pistol-Grip 3 Channel Transmitter.
• Digital Trimming.
• Steering Dual-Rate (ST D/R) Adjustment.
• End Point Adjustment (EPA).
• Build in Fail-safe.
• Transmitter Model: G82198TX.
• Frequencies: 2.4GHz.
• Weight: 375gm.
• Power Supply: 4 - AA Alkaline (Not Included).

Receiver Model: G82198RX

• Frequency: 2.4GHz.
• Power Supply: DC 4.8 ~ 6.0V.
• Dimensions: 1.35” (L) x 0.72” (W) x 0.53” (H).

Body:

• 1/10 Short Course Truck Body.
• Injection Molding Scale Body Details.

Chassis:

• Dual Vertical Chassis Design (DVC).
• F/R Hight Impact Skid plate and Bumper.
• Full Precision Ball Bearing Supported.
• Fully Equipped with Allen Hex Screw.
• Build-in High Torque Servo Saver.
• Easy Access Battery Tray.
• Battery Tray Size 139 x 48 x 26mm.

Suspension:

• Big Bore Oil Filled Adjustable Coil Over Shocks.
• Over Size Shock Body with 3.5mm Hardened Steel Polished Shaft.
• Fully Adjustable Suspensions Geometry.

Drivetrain:

• 4 Wheels Drives.
• Full Metal Transmission Gears.
• Alum Center Shaft Drivetrain.
• Sealed Transmission Compartment.
• Front, Center, and Rear Differential.
• Bevel Gear Type Differential.

Gear Ratio:

• Spur / Pinion Gear M0.8 54T/M0.8 14T.
• 37T Ring & 13T Pinion Gear.

Wheel/Tyres:

• Short Course Truck Wheels 2.2”/3.0” With 12mm Hex.
• Long Wearing Short Course Truck Tyres. 

Specifications

Model: 1/10 Scale 4 wheels Drive Reeper Short Course Truck
Length: 20.9 inches (530mm)
Width: 11.42 inches (290mm)
Wheelbase: 12.8 inches (325mm)
Ground Clearance: 8.7inches (220mm)
Weight: 5.73lb (2.6 kg)

Features

• 100A WP-MAX10-SCT-100A-3S RTR Sensor-less with T-Plug (Powered by HobbyWing).
• 2-3S Li-po (Lithium-polymer) or 6-9 Cell Ni-Mh Batteries.
• Water-Proof and Dust-Proof for All Weather.
• Super Internal Switch-Mode BEC with 6V / 7.4V for Usage with High Voltage Servo.
• Built-In Capacitor Module.
• Automatic Throttle Range Calibration.
• Low Voltage Cut-Off Protection for Li-Po and NiMH Battery.
• Over-Heat Protection and Throttle Signal Loss Protection.
• 5 Levels of acceleration/punch.
• 9 Levels of maximum brake force.

Specifications

Motor
CEN Racing High Performance 3658 3000KV Brushless Motor (Sensorless).

Servo
12Kg Metal Gear Servo (By Savox).
4.8V - 0.26 sec/60° 10.0 kg-cm.
6.0V - 0.23 sec/60° 12.0 kg-cm.
With 25T Horn Gear Spline.

Radio System
AMP-30 TX 3-Channel Transmitter.
Frequencies: 2.4GHz.
Digital Trimming.
Steering Dual-Rate (ST D/R) Adjustment.
End Point Adjustment (EPA).
Build in Failsafe.
Power Supply: 4 - AA Alkaline (Not Included).
AMP30 RX 3-Channel Receiver.
Frequency: 2.4GHz.
Power Supply: DC 4.8 ~ 6.0V.
Dimensions: 1.35” (L) x 0.72” (W) x 0.53” (H).

Body
Official Licensed 2024 M-Sport Ford Puma Rally 1 Edition.
Fully Detailed Injection-Molded Body Accessories Body Details.
Size: Length 20.08inches (510mm) / Width 9.45 inches (240mm).

Chassis
3mm Aluminium Chassis.
Front and Rear 3mm Aluminum Shock Towers.
Aluminum Arm Brace.
Full Precision Ball Bearing Support.
Wider Body Mount Positions for Better Support.
Front Skid plate with Durable Foam Bumper.
Injection-Molded Rear Diffuser.
Easy Access Battery Tray.
Battery Tray Size 142mm x 48mm.
Chassis Length:  18.11 inches (460mm).
Chassis Width:   9.06 inches (230mm).
Wheelbase:  11.80 inches (300mm).
Ground Clearance: 0.98 inches (25mm).

Suspension
Aerodynamic Lower Arm Suspension Design.
Big Bore Oil Filled Adjustable Coil Over Shocks.
12mm Over Size Shock Body with 3mm Hardened Steel Polished Shaft.
Racing Spring.
Adjustable Turnbuckles.
Adjustable Wheelbase +/- 6mm.

Gear Ratio
Spur / Pinion 46/14T 3.29:1.
Ring & Pinion 40/17T 2.35:1.

Drivetrain
Full Time 4-Wheels Drive.
Center Shaft Drivetrain for more power transferred to the wheels.

Metal Transmission Gears
Aluminium Adjustable Motor Mount.
Oil Filled Two Differential Drive System.    
Center Direct Drive.
Hight Efficient Transmission System.
6 Gear Bevel Gear Type Differential.
Front / Rear Harden Steel Dog Bone and outdrives.

Wheels
High Impact & Light Weight WRC Racing Wheel 56 X 35.50 mm.

Tyres
High Performance Racing Rubber Compound Tires 56 x 80 x 35.50 mm.

CEN Racing’s new officially licensed 2024 M-Sport Ford Puma Rally1 Brushless 1/8 RTR is sure to be popular with worldwide rally fans. Featuring a fully detailed and beautifully decaled bodyshell, injection moulded rear wing, mirrors, side intakes, rear chassis diffuser and Pirelli P-Zero styled wheels and tyres the M-Sport is ready for your next Special Stage.

Underneath, a new chassis design features next generation aerodynamic lower suspension arms and oil filled shock absorbers, mounted to 3mm front and rear aluminium shock towers. A 3mm aluminium chassis mounts a full time 4wd transmission with metal gears and 6-gear bevel differentials.

Hobbywing 100A 3S LiPo rated brushless speed control and Cen Racing 3658 3000kv brushless motor provide different levels of power to suit all surfaces, while steering is controlled by a 12kg metal geared Savox servo.

RC rally redefined with the Cen Racing M-Sport Ford Puma.

Features

ESC  

• 100A WP-MAX10-SCT-100A-3S RTR Sensor-less with T-Plug (Powered by HobbyWing).
• 2-3S Li-po (Lithium-polymer) or 6-9 Cell Ni-Mh Batteries.
• Water-Proof and Dust-Proof for All Weather.
• Super Internal Switch-Mode BEC with 6V / 7.4V for Usage with High Voltage Servo.
• Built-In Capacitor Module.
• Automatic Throttle Range Calibration.
• Low Voltage Cut-Off Protection for Li-Po and NiMH Battery.
• Over-Heat Protection and Throttle Signal Loss Protection.
• 5 Levels of acceleration/punch.
• 9 Levels of maximum brake force.

Motor

• CEN Racing High Performance 3658 3000kv Brushless Motor (Sensorless).

Servo

• 12Kg Metal Gear Servo (By Savox).
• 4.8V - 0.26 sec/60° 10.0 kg-cm.
• 6.0V - 0.23 sec/60° 12.0 kg-cm.
• With 25T Horn Gear Spline.

Radio System

AMP-30 TX 3-Channel Transmitter.

• Frequencies: 2.4GHz.
• Digital Trimming.
• Steering Dual-Rate (ST D/R) Adjustment.
• End Point Adjustment (EPA).
• Build in Failsafe.
• Power Supply: 4 x AA Alkaline (Not Included).

AMP30 RX 3-Channel Receiver.

• Frequency: 2.4GHz.
• Power Supply: DC 4.8 ~ 6.0V.
• Dimensions: 1.35” (L) x 0.72” (W) x 0.53” (H).

Body

• Official Licensed 2024 M-Sport Ford Puma Rally 1 Edition
• Fully Detailed Injection-Molded Body Accessories Body Details
• Size: Length 20.08inches (510mm) / Width 9.45 inches (240mm)

Chassis

• 3mm Aluminum Chassis
• Front and Rear 3mm Aluminium Shock Towers
• Aluminium Arm Brace
• Full Precision Ball Bearing Support
• Wider Body Mount Positions for Better Support
• Front Skid plate with Durable Foam Bumper
• Injection-Molded Rear Diffuser
• Easy Access Battery Tray
• Battery Tray Size 142mm x 48mm

Suspension

• Aerodynamic Lower Arm Suspension Design
• Big Bore Oil Filled Adjustable Coil Over Shocks
• 12mm Over Size Shock Body with 3mm Hardened Steel Polished Shaft
• Racing Spring
• Adjustable Turnbuckles
• Adjustable Wheelbase +/- 6mm

Gear Ratio

• Spur / Pinion 46/14T 3.29:1
• Ring & Pinion 40/17T 2.35:1

Drivetrain

• Full Time 4-Wheels Drive
• Center Shaft Drivetrain for more power transferred to the wheels

Metal Transmission Gears

• Aluminium Adjustable Motor Mount
• Oil Filled Two Differential Drive System      
• Center Direct Drive
• Hight Efficient Transmission System
• 6 Gear Bevel Gear Type Differential
• Front / Rear Harden Steel Dog Bone and outdrives

Wheel

• High Impact & Light Weight WRC Racing Wheel 56 X 35.50 mm.

Tyres

• High Performance Racing Rubber Compound Tyres 56 x 80 x 35.50 mm.

Specifications

Chassis Length: 18.11 inches (460mm)
Chassis Width: 9.06 inches (230mm)
Wheelbase: 11.80 inches (300mm)
Ground Clearance: 0.98 inches (25mm)
Weight: 5.51 lb. 2.5kg

Required To Complete

• Battery and charger are not included (Recommend 2S - 3S Lipo Battery).

CEN Racing’s officially licensed M-Sport Ford Puma Rally1 Brushless 1/8 RTR is sure to be popular with worldwide rally fans. Featuring a fully detailed and beautifully decaled bodyshell, injection moulded rear wing, mirrors, side intakes, rear chassis diffuser and Pirelli P-Zero styled wheels and tyres the M-Sport is ready for your next Special Stage.

Underneath, a new chassis design features next generation aerodynamic lower suspension arms and oil filled shock absorbers, mounted to 3mm front and rear aluminium shock towers. A 3mm aluminium chassis mounts a full time 4wd transmission with metal gears and 6-gear bevel differentials.

Hobbywing 100A 3S LiPo rated brushless speed control and Cen Racing 3658 3000kv brushless motor provide different levels of power to suit all surfaces, while steering is controlled by a 12kg metal geared Savox servo.

RC rally redefined with the Cen Racing M-Sport Ford Puma.

Features

ESC  

• 100A WP-MAX10-SCT-100A-3S RTR Sensorless with T-Plug (Powered by HobbyWing).
• 2-3S Li-po (Lithium-polymer) or 6-9 Cell Ni-Mh Batteries.
• Water-Proof and Dust-Proof for All Weather.
• Super Internal Switch-Mode BEC with 6V / 7.4V for Usage with High Voltage Servo.
• Built-In Capacitor Module.
• Automatic Throttle Range Calibration.
• Low Voltage Cut-Off Protection for Li-Po and NiMH Battery.
• Over-Heat Protection and Throttle Signal Loss Protection.
• 5 Levels of acceleration/punch.
• 9 Levels of maximum brake force.

Motor

• CEN Racing High Performance 3658 3000kv Brushless Motor (Sensorless).

 Servo

• 12Kg Metal Gear Servo (By Savox).
• 4.8V - 0.26 sec/60° 10.0 kg-cm.
• 6.0V - 0.23 sec/60° 12.0 kg-cm.
• With 25T Horn Gear Spline.

Radio System

AMP-30 TX 3-Channel Transmitter.

• Frequencies: 2.4GHz.
• Digital Trimming.
• Steering Dual-Rate (ST D/R) Adjustment.
• End Point Adjustment (EPA).
• Build in Failsafe.
• Power Supply: 4 x AA Batteries (Not Included).

AMP30 RX 3-Channel Receiver.

• Frequency: 2.4GHz.
• Power Supply: DC 4.8 ~ 6.0V.
• Dimensions: 1.35” (L) x 0.72” (W) x 0.53” (H).

Body

• Official Licensed 2023 M-Sport Ford Puma Rally 1 Edition
• Fully Detailed Injection-Molded Body Accessories Body Details
• Size: Length 20.08inches (510mm) / Width 9.45 inches (240mm)

Chassis

• 3mm Aluminum Chassis
• Front and Rear 3mm Aluminum Shock Towers
• Aluminum Arm Brace
• Full Precision Ball Bearing Support
• Wider Body Mount Positions for Better Support
• Front Skid plate with Durable Foam Bumper
• Injection-Molded Rear Diffuser
• Easy Access Battery Tray
• Battery Tray Size 142mm x 48mm

Suspension

• Aerodynamic Lower Arm Suspension Design
• Big Bore Oil Filled Adjustable Coil Over Shocks
• 12mm Over Size Shock Body with 3mm Hardened Steel Polished Shaft
• Racing Spring
• Adjustable Turnbuckles
• Adjustable Wheelbase +/- 6mm

Gear Ratio

• Spur / Pinion 46/14T 3.29:1
• Ring & Pinion 40/17T 2.35:1

Drivetrain

• Full Time 4-Wheels Drive
• Center Shaft Drivetrain for more power transferred to the wheels

Metal Transmission Gears

• Aluminum Adjustable Motor Mount
• Oil Filled Two Differential Drive System      
• Center Direct Drive
• Hight Efficient Transmission System
• 6 Gear Bevel Gear Type Differential
• Front / Rear Harden Steel Dog Bone and outdrives

Wheel

• High Impact & Light Weight WRC Racing Wheel 56 X 35.50 mm.

Tyres

• High Performance Racing Rubber Compound Tyres 56 x 80 x 35.50 mm.

Specifications

Chassis Length: 18.11 inches (460mm)
Chassis Width: 9.06 inches (230mm)
Wheelbase: 11.80 inches (300mm)
Ground Clearance: 0.98 inches (25mm)
Weight: 5.51 lb. 2.5kg

Needed To Complete

• Battery and charger (Recommend 2S - 3S Lipo Battery)

Features

SC-60A WP-1060-Brushed (Powered by HobbyWing):

• Water-proof and dust-proof for all weather
• Built-In Capacitor Module
• Automatic throttle range calibration
• Low voltage cut-off protection for Li-Po (lithium polymer) and NiMH battery
• Over-Heat protection and throttle signal loss protection
• Easily programmed with jumpers

Motor-RS-550 high Torque Motor - Power By Mabuchi Motor

Servo -12Kg Servo O.E.M. by Savox:

• 4.8V 0.26 sec/60deg 10.0 kg-cm
• 6.0V 0.23 sec/60deg 12.0 kg-cm
• 25T Horn Gear Spline

Radio System:

• Pistol-Grip AMP 30 3 Channel Transmitter
• Digital Trimming
• Steering Dual-Rate (ST D/R) Adjustment
• End Point Adjustment (EPA)
• Built in Failsafe

Chassis:

• Steel Frame  
  - CMS (Chassis Mounted Servo) Chassis Design
  - Stamped Steel Shock Hoops
  - Steel Skid Plate. 
  - Full Precision Ball Bearing Support
  - Adjustable Turnbuckles
  - Steel skid Plate

Suspension:

• 78mm Big Bore Oil Filled Adjustable Coil Over Shocks.
• 12mm over size shock body with 3mm Hardened Steel Polished Shaft.
• Harden Steel Steering Drag Link.
• CNC Machined 6mm Aluminium Linkage.
• Front / Rear Sway Bar.

Drivetrain:

• Sway bar included
• 4 Wheel Drive
• Center Shaft Drive Train for more power transferred to the wheels
• Highly Efficient Transmission System
• Wide Range Easy Changeable Gear Box Design
• Sealed transmission eliminates dirt and dust
• Sealed Axle housing
• Sealed Transmission Case
• 5mm Hardened Steel Axle shaft
• Differential Center Locker Front/Rear Planetary Gear Type
• Metal Transmission Gears
• Planetary Gear type Differential

Tyres:

• Official Licensed Fury Tyres
• Country Hunter R/T Tyre
• 46mm x 91mm x 31mm

Official Licensed by Ford Motor

• Ford Ranger MS-RT
• Scale Body Details
• Injection Molding Mirror and Roof Spoiler

Specifications

Length: 21.65 inch (550mm)
Width: 9.1 inch (230mm)
Wheelbase: 12.95 inch (329mm)
Ground Clearance: 2.2 inch (55mm)
Weight: 4.7 lb. 2.15kg

Gear Ratio:
- Hi / Speed Ratio 1.56:1
- Hi / Torque Ratio 2.8:1
- Spur / Pinion Gear 32p85/32p10T
- Ring & Pinion Gear 30/15T 2:1

Needed To Complete

• Battery and Charger

Features

SC-60A WP-1060-Brushed (Powered by HobbyWing):

• Water-proof and dust-proof for all weather
• Built-In Capacitor Module
• Automatic throttle range calibration
• Low voltage cut-off protection for Li-Po (lithium polymer) and NiMH battery
• Over-Heat protection and throttle signal loss protection
• Easily programmed with jumpers

Motor-RS-550 high Torque Motor - Power By Mabuchi Motor

Servo -12Kg Servo O.E.M. by Savox:

• 4.8V 0.26 sec/60deg 10.0 kg-cm
• 6.0V 0.23 sec/60deg 12.0 kg-cm
• 25T Horn Gear Spline

Radio System:

• Pistol-Grip AMP 30 3 Channel Transmitter
• Digital Trimming
• Steering Dual-Rate (ST D/R) Adjustment
• End Point Adjustment (EPA)
• Built in Failsafe

Chassis:

• Steel Frame  
  - CMS (Chassis Mounted Servo) Chassis Design
  - Stamped Steel Shock Hoops
  - Steel Skid Plate. 
  - Full Precision Ball Bearing Support
  - Adjustable Turnbuckles
  - Steel skid Plate

Suspension:

• 78mm Big Bore Oil Filled Adjustable Coil Over Shocks.
• 12mm over size shock body with 3mm Hardened Steel Polished Shaft.
• Harden Steel Steering Drag Link.
• CNC Machined 6mm Aluminium Linkage.
• Front / Rear Sway Bar.

Drivetrain:

• Sway bar included
• 4 Wheel Drive
• Center Shaft Drive Train for more power transferred to the wheels
• Highly Efficient Transmission System
• Wide Range Easy Changeable Gear Box Design
• Sealed transmission eliminates dirt and dust
• Sealed Axle housing
• Sealed Transmission Case
• 5mm Hardened Steel Axle shaft
• Differential Center Locker Front/Rear Planetary Gear Type
• Metal Transmission Gears
• Planetary Gear type Differential

Tyres:

• Official Licensed Fury Tyres
• Country Hunter R/T Tyre
• 46mm x 91mm x 31mm

Official Licensed by Ford Motor

• Ford Ranger MS-RT
• Scale Body Details
• Injection Molding Mirror and Roof Spoiler

Specifications

Length: 21.65 inch (550mm)
Width: 9.1 inch (230mm)
Wheelbase: 12.95 inch (329mm)
Ground Clearance: 2.2 inch (55mm)
Weight: 4.7 lb. 2.15kg

Gear Ratio:
- Hi / Speed Ratio 1.56:1
- Hi / Torque Ratio 2.8:1
- Spur / Pinion Gear 32p85/32p10T
- Ring & Pinion Gear 30/15T 2:1

Needed To Complete

• Battery and Charger

CEN Racing proudly announces the arrival of the 8901BL 2025 1/16 Scale Ford M-Sport Puma Rally 1 Brushless RTR, an officially licensed rally model that blends true rally racing inspiration with high-performance RC engineering.

Drawing visual and thematic influence from the real-world M-Sport Ford Puma Rally1 contesting the 2025 FIA World Rally Championship, the new CEN 1/16 delivers authentic rally styling, agile handling, and brushless power for thrilling ready-to-run RC action.

The M-Sport Ford Puma Rally1 represents cutting-edge competition machinery in the WRC, engineered to meet the latest Rally1 regulations with striking performance and advanced safety features. Although the 1/16 scale model is not a hybrid race car, its design captures the dynamic spirit of the full-size rally machine that competes across gravel, snow, and asphalt stages around the world.

The 8901BL is equipped with a powerful 2838 3600KV brushless motor paired with a WP-16BL30-RTR G2 ESC by Hobbywing, providing responsive throttle and high torque. Its waterproof and dust-proof electronics ensure durability through all-weather running, with advanced protections like low-voltage cut-off and signal loss safeguards. CEN’s officially licensed Ford and M-Sport body features lifelike rally proportions and rally wheels — perfect for display or action runs. The model sits on a one-piece molded chassis with a realistic four-wheel drive layout, universal drive shafts, and adjustable oil-filled shocks for capable handling on mixed surfaces.

Features

• Assembled Ready-To-Run.
• Hobbywing WP-16BL30 Speed Control.
• 2838 3600kv Brushless Motor.
• 5kg Servo by Savox.
• Mod-3S 3 Channel Digital Radio System.
• Official Licensed by Ford Motor & M-Sport.
• One-piece Molded Chassis.
• Low Center of Gravity Design.
• Fully ball bearing.
• High Torque Servo Saver.
• Adjustable Caster, Ride Height & F/R Cambers.
• Oil Filled Adjustable Coil Over Shocks.
• Hardened Steel Polished Shock Shaft.
• 4wd Centre Shaft Drivetrain for More Power Transferred to the Wheels.
• High Efficient Transmission System.
• Universal Drive Shafts.
• 16 Spoke Rally Wheel.
• Rally Tread tyres.

Specifications

Esc
30A 16BL30 RTR.
Water-proof and dust-proof for all weather.
Built-in capacitor module.
Low voltage cut-off protection for Li-Po and NiMH battery.
Over-heat protection and throttle signal loss protection.

Motor
2838 Brushless 3600Kv motor.

Servo
Dimensions: L40.7mm x W20mm x H39.4mm.
Torg: @ 4.8v - 4.2Kg-cm.
Speed: @4.8v - 0.16 sec / 60deg.
Torq: @ 6.0v - 6.5Kg-cm.
Speed: @6.0v - 0.14 sec / 60deg.
25T Horn Gear Spline / 5.97mm.

Body
Official licensed by Ford Motors.
Scale realistic body details.

Chassis
One-piece molded chassis.
Low centre of gravity design, equpped with brushless motor.
full ball bearing.
High torgue servo saver.
Easy access battery tray.
Battery tray size: 102.5 x 38 x 20mm.

Suspension
Aluminium shock stay.
oil filled adjustable coil over shocks.
Hardened steel polished shock shaft.
Adjustable castor, ride height and F/R cambers.

Drivetrain
4 wheel drive.
Aluminium centre shaft drivetrain for more power transferred to the wheels.
High efficient transmission system.
Universal drive shafts.

Radio System
Pistol-grip Mod-3s 3 Channel Transmitter.
Digital Trimming.
Steering dual-rate (ST D/R) adjustment.
End Point adjustment (EPA).

Wheels
16 spoke rally wheels.
Tyres - 33.5 x 47.5 x 22.5mm

Size
Length: 300mm
Wheelbase: 188mm
Width: 140mm
Ground Clearance: 12mm
Weight: kg. 580g

Required To Complete

• Battery and charger.

Our First HI-DEF Brushless 'Almost Ready To Race' is here!

As the response globally from both Racers and Fun Builders to the Subaru BRZ GT300 2021 body set was so phenomenal, we decided to offer it to everyone, as a ARTR model. Pre-Built, Pre-Painted, Decals Applied and 'Almost' Ready to Race.

Carisma is excited to announce the launch of the 1/10 Scale SUBARU BRZ GT300 2021 model, expertly crafted on the advanced M40S 2.0 chassis. This new release is designed for racing enthusiasts and collectors alike, offering a thrilling driving experience with a robust, performance-focused design.

The 2021 Subaru BRZ GT300 is Subaru’s GT300-class Super GT race car, built and run by R&D Sport (the “Subaru BRZ R&D Sport” entry). It was introduced as an all-new BRZ GT300 challenger and marked Subaru’s push to win major Super GT titles again—ultimately leading to Subaru’s first-ever series championship in Super GTfor the GT300 category.

Features

• Chassis: M40S 2.0 chassis
• Material: Full carbon bottom plate and upper deck
• Power Unit: Same power unit as the M48S chassis, the capable 3S friendly ESC
• Transmission: Full metal gear transmission with center differentials
• Motor: BIG block brushless motor with 3S friendly ESC, suitable for 3S batteries
• Tires: Dedicated Slick Racing tires designed for optimal traction.
• Wheel Detailing: Multi-spoke Racing Wheels
• Aerodynamic Features: Injection-moulded body features, including rear spoilers for high down force application.
• Performance: Designed to excel on various on road tracks, offering exhilarating speed and handling
• Suspension: Aluminum oil shocks all around, absorbing bumps so you can drive harder and corner faster
• Extra set of Pinion and Spur gear is included. So you can go faster.
• JUST ADD BATTERIES ( 3S friendly)

Specifications

Width: 189mm
Wheel Base: 257mm

Carisma Unveils the Exciting 1/10 Scale Subaru WRC 2006 Model, Item: 94668 M40S 2.0 Subaru WRC 2006 ARR.

Based on the M40S 2.0 Chassis – Conquer Any Terrain!

Carisma is excited to announce the launch of the 1/10 Scale Subaru WRC 2006 model, expertly crafted on the advanced M40S 2.0 chassis. This new release is designed for rally enthusiasts and collectors alike, offering a thrilling driving experience with a robust, performance-focused design. It also replaced the OLD item:

About the 2006 Subaru WRC Rally Car.

The 2006 Subaru WRC rally car is renowned for its impressive speed and agility, having been a formidable competitor in the World Rally Championship. It features a turbocharged flat-four engine, an all-wheel-drive system, and a lightweight chassis, all of which contributed to its success in conquering diverse terrains. The combination of speed and control made it a fan favorite, embodying the spirit of rallying with its iconic blue and yellow livery.

Carisma's Rally Experience.

In creating the Subaru WRC 2006 model, Carisma harnesses the capabilities of the M40S 2.0 chassis, engineered for both performance and durability. This model is paired with dedicated rally tyres, allowing it to glide over rough surfaces, kick up dirt, and masterfully slide around corners. The center differential enhances traction on loose surfaces by diverting power where it is needed. Whether you're tackling gravel roads or pretending to compete for the championship, this RC car is designed to deliver an exhilarating experience.

"I am genuinely thrilled about this model—it's crafted for adventure and fun, allowing enthusiasts to embrace their inner rally driver on any terrain," says Ivan.

Features

• Chassis: M40S 2.0 chassis.
• Material: Full carbon bottom plate and upper deck.
• Power Unit: Same power unit as the M48S chassis, the capable ARC-3 ESC.
• Transmission: Full metal gear transmission with center differentials.
• Motor: BIG block brushless motor with ARC-3, suitable for 3S batteries.
• Tyres: Dedicated rally tyres designed for optimal grip and sliding maneuvers.
• Wheel Detailing: Multi-spoke rally wheels painted gold for an enhanced rally look.
• Aerodynamic Features: Injection-moulded body features, including rear spoilers for a stylish finish.
• Performance: Designed to excel on various terrains, offering exhilarating speed and handling.
• Suspension: Aluminium oil shocks all around, absorbing bumps so you can drive harder and corner faster.
• Fun: Just add batteries!

Needed To Complete

• 2-3S LiPo Battery.

Introducing the Carisma New M40S 2.0 Chassis with the Audi R8 LMS.

We’re thrilled to unveil the latest evolution in our M40S lineup—the M40S 2.0! This highly anticipated release brings a fresh take on a beloved platform that has served RC enthusiasts reliably for years.

The Audi R8 LMS The Audi R8 LMS is a standout in the GT racing world, celebrated for its aggressive widebody design and exhilarating performance. This GT3 machine is particularly loved for its dramatic flared fenders, purposeful aero package, and massive high-downforce rear wing, which not only enhance its race-bred aesthetics but also deliver exceptional high-speed stability and cornering grip.

True to Carisma Traditions In the spirit of Carisma, every detail of the Audi R8 LMS has been meticulously replicated in this 1/10 scale model. It features a performance front injection-molded splitter and a high-downforce rear wing, enhancing both aesthetics and aerodynamics.

The M40S 2.0 chassis is designed to bring the thrill of the R8 LMS race experience right into your hands - but only while stocks last.

Features

• Permanent 4WD Chassis: Integrating a center differential from our trusted M48S platform, the M40S 2.0 ensures optimal power distribution.
• Potent Powertrain: Equipped with a robust Brushless Motor and Carisma Brushless ESC, this chassis delivers thrilling performance.
• Advanced Differential System: With front, middle, and rear differentials, power is distributed effectively for superior traction and handling.
• Aluminium Oil Shocks: Standard on the M40S 2.0, these shocks absorb bumps effortlessly, enhancing your driving experience.
• Full Carbon Composite: The lightweight, stiff bottom chassis and top deck provide the rigidity needed for high-performance racing.
• Anti-Roll Bars: Available as Standard for front and rear, these bars enhance stability during sharp turns.
• Front and rear light buckets are included. LED lights are available separately.

Required To Complete

• Battery Required: Just add your own battery to get started! 2~3S LiPo Friendly.

Championship DNA. Mini Scale. Maximum Fun.

Carisma RC is proud to introduce the Mini 4XS, a high-performance 1/14 scale 4WD off-road buggy developed to bring genuine race-inspired handling, brushless power and tuneable performance for all mini buggy fans.

Drawing inspiration from our competition-proven racing platforms, the Mini 4XS has been engineered to deliver the perfect balance of speed, durability and driver confidence. Whether you're attacking your local track, setting up a backyard racecourse or simply looking for a high-performance buggy that won't break the bank, the Mini 4XS is designed to put a smile on your face every time you pull the trigger.

At its heart is a powerful 4500KV brushless motor combined with a robust full-metal transmission and slipper clutch system, delivering smooth acceleration, efficient power delivery and the durability needed for serious off-road action. The lightweight G10 chassis, precision suspension geometry and oil-filled aluminium shocks work together to provide excellent handling on everything from loose dirt and grass to prepared indoor race surfaces.

The Mini 4XS has been designed with racers and enthusiasts in mind. A standard-size servo layout opens a huge range of upgrade possibilities, while compatibility with many GT14B components provides access to an established ecosystem of option parts and tuning upgrades. The aggressive low-profile buggy body and high-downforce rear wing not only give the car an unmistakable race-inspired appearance but also contribute to stable handling and predictable jumping characteristics.

Supplied with super-soft racing pin tyres mounted on eye-catching fluorescent yellow dish wheels, the Mini 4XS arrives ready to tackle a wide variety of track conditions straight from the box. For drivers seeking a compact buggy with genuine racing pedigree, impressive durability and outstanding value, the Mini 4XS represents the next evolution in mini-scale off-road performance.

Features

Performance

• High-performance 4500KV sensorless brushless motor.
• 35A brushless electronic speed controller.
• 2S LiPo compatible power system.
• Full-time 4WD shaft-driven drivetrain.
• Full metal gear transmission for maximum durability.
• Adjustable slipper clutch system.
• Race-inspired suspension geometry.

Chassis & Suspension

• Lightweight G10 chassis plate.
• G10 front and rear shock towers.
• Four-wheel independent suspension.
• Aluminium oil-filled coil over shock absorbers.
• Long-travel suspension design.
• Standard-size servo compatibility.
• Optimised weight distribution for improved handling.

Race-Inspired Design

• Aerodynamic low-profile buggy body shell.
• Oversized rear wing for improved stability.
• Screen-printed race graphics.
• Fluorescent yellow dish wheels.
• Soft racing pin tyres for maximum grip on loose surfaces.
• White wheel option available separately.

Upgrade Potential

• Compatible with many GT14B option parts.
• Standard-size servo mounting system.
• Wide range of aftermarket tuning and performance upgrades available.

Electronics

• 2.4GHz radio system included.
• Reliable brushless power package.
• Easy RTR operation.
• Designed for beginners and experienced racers alike.

Specifications

Scale: 1/14
Drive System: 4WD Shaft Drive
Motor: 4500KV Sensorless Brushless
ESC: 35A Brushless ESC (2S LiPo Compatible)
Transmission: Full Metal Gear Transmission
Slipper Clutch: Yes
Servo: Standard Size
Shocks: Aluminium Oil-Filled
Chassis Plate: G10 Composite
Shock Towers: G10 Composite
Radio System: 2.4GHz
Tyres: Soft Racing Dirt-Spec Pin Tyres
Wheels: Fluorescent Yellow Dish Wheels
Width: 200mm
Wheelbase: 228mm
Body: Screen Printed Buggy Body
Parts Compatibility: Compatible with most GT14B components

Required To Complete

• 2S Mini Battery Pack (Max Size 40mm x 100mm x 20mm)
• 2S Lipo Charger
• 4 x AA Batteries

The GT24 RS 2.0 is a 1/24th Retro Micro Rally Car that's inspired by the classic era of 70's and 80's Rally Car history. The body is a nostalgic nod to the classic RWD Rally pioneers, but our version stays firmly in 4WD territory, offering the best in Retro Looks and a Modern RC Driveline.

New Features

The chassis now boasts a 130-size brushed motor, coupled with our innovative ARC-2000MT 2-in-1 ESC/RX system. This upgrade simplifies the control system, making it more user-friendly and affordable. The brushed motor solution is particularly advantageous for beginners and casual users, offering smoother acceleration and easier maintenance compared to brushless motors. Additionally, the 2.0 chassis benefits from the use of 3-wire servos, enhancing performance and reliability.

For customers desiring even greater speed and efficiency, the system remains highly adaptable. If you wish to upgrade to a brushless solution, simply replace the ESC with the ARC-24 and swap the motor for our world-famous 8000KV brushless motor. This flexibility ensures that you can tailor your experience to your preferences.

Fast, fun, affordable, upgradable, robust, and collectible—what more could any self-respecting petrol head desire?

Specifications

• CTX-2000 2.4GHz Transmitter
• ARC-2000MT 2-in-1 RX/ESC (Brushless)
• TC SPEC 130-size brushed motor as standard
• 7.2V NiMH Micro Stick Pack included
• Low maintenance friction dampers
• High traction tarmac tires
• 4 x AA batteries for TX included
• Safe 5V USB charger included
• Hobby grade steering servo
• Officially licensed bodyshell
• Fully ball-raced driveline
• Wheelbase: 121mm
• Width: 89mm

Carisma RC proudly presents the fully licensed 'No 6' Toyota Celica GT-Four ST185, famously driven by Juha Matti Pellervo Kankkunen and his Welsh co-driver Nicky Grist, adorned in the iconic Castrol trim scheme. Simply breathless!

The Toyota Celica GT-Four ST185 was a dominant force in the world of 90’s rallying, clinching an impressive 16 full WRC series wins and securing three overall titles in the W2L series. It celebrated WRC Driver's Championships with legends including Carlos Sainz (1992), Juha Kankkunen (1993), and Didier Auriol (1994), along with WRC Manufacturer's Titles in 1993 and 1994. This iconic car continues to inspire rally enthusiasts worldwide, embodying the spirit of an era that many dreamt of experiencing firsthand.

Now, Carisma continues this legacy with the GT24 Rally Series Collectables, providing users the chance to own this legendary vehicle and experience the thrills that only a 4WD brushed and LiPo-compatible micro platform can deliver. Our renowned Carisma Micro DNA is embedded in every model, ensuring a top-notch experience.

New Features

The chassis now boasts a 130-size brushed motor, coupled with our innovative ARC-2000MT 2-in-1 ESC/RX system. This upgrade simplifies the control system, making it more user-friendly and affordable. The brushed motor solution is particularly advantageous for beginners and casual users, offering smoother acceleration and easier maintenance compared to brushless motors. Additionally, the 2.0 chassis benefits from the use of 3-wire servos, enhancing performance and reliability.

For customers desiring even greater speed and efficiency, the system remains highly adaptable. If you wish to upgrade to a brushless solution, simply replace the ESC with the ARC-24 and swap the motor for our world-famous 8000KV brushless motor. This flexibility ensures that you can tailor your experience to your preferences.

Fast, fun, affordable, upgradable, robust, and collectible—what more could any self-respecting petrol head desire?

Specifications

• CTX-2000 2.4GHz Transmitter
• ARC-2000MT 2-in-1 RX/ESC (Brushless)
• TC SPEC 130-size brushed motor as standard
• 7.2V NiMH Micro Stick Pack included
• Low maintenance friction dampers
• High traction tarmac tires
• 4 x AA batteries for TX included
• Safe 5V USB charger included
• Hobby grade steering servo
• Officially licensed bodyshell
• Fully ball-raced driveline
• Wheelbase: 121mm
• Width: 89mm

Carisma RC proudly presents the fully licensed Mitsubishi Lancer EVO 4 WRC Brushed Motor Edition, a tribute to the legendary rally vehicle that dominated the World Rally Championship. With its iconic design and powerful performance, this model captures the spirit of the EVO 4, making it a must-have for rally enthusiasts!

The Mitsubishi Lancer EVO 4 was a formidable competitor in the WRC, known for its incredible agility and performance on various terrains. This model replicates the essence of that era, allowing fans to relive the excitement of rally racing.

Now, Carisma continues this legacy with the GT24 Rally Series Collectables, providing users the chance to own this iconic vehicle and experience the thrills that only a 4WD brushed and LiPo-compatible micro platform can deliver. Our renowned Carisma Micro DNA is embedded in every model, ensuring a top-notch experience.

New Features

The chassis now boasts a 130-size brushed motor, coupled with our innovative ARC-2000MT 2-in-1 ESC/RX system. This upgrade simplifies the control system, making it more user-friendly and affordable. The brushed motor solution is particularly advantageous for beginners and casual users, offering smoother acceleration and easier maintenance compared to brushless motors. Additionally, the 2.0 chassis benefits from the use of 3-wire servos, enhancing performance and reliability.

For customers desiring even greater speed and efficiency, the system remains highly adaptable. If you wish to upgrade to a brushless solution, simply replace the ESC with the ARC-24 and swap the motor for our world-famous 8000KV brushless motor. This flexibility ensures that you can tailor your experience to your preferences.

Fast, fun, affordable, upgradable, robust, and collectible—what more could any self-respecting petrol head desire?

Specifications

• CTX-2000 2.4GHz Transmitter
• ARC-2000MT 2-in-1 RX/ESC (Brushless)
• TC SPEC 130-size brushed motor as standard
• 7.2V NiMH Micro Stick Pack included
• Low maintenance friction dampers
• High traction tarmac tires
• 4 x AA batteries for TX included
• Safe 5V USB charger included
• Hobby grade steering servo
• Officially licensed bodyshell
• Fully ball-raced driveline
• Wheelbase: 121mm
• Width: 89mm

Carisma are excited to unveil the latest iteration of their officially licensed rally icon: the Audi Sport Quattro S1. Building on the success of the previous GT24 1.0 model, this new 2.0 version introduces significant chassis upgrades and a hugely improved driving feel—delivering greater stability, responsiveness, and control in a compact 1/24-scale package.

“Back in the ’80s, long before the Audi R8 was even conceived, came another true Audi supercar… one that took rallying to a whole new level…”

The body is beautifully reproduced in a lightweight, hobby-grade vacuum-formed shell with crisp detailing and high-quality decals. The paint scheme pays homage to the iconic Audi Quattro factory rally colours that defined Group B competition.

But Before That, A Little Historic Rewind

In 1981, Audi launched its first World Rally Championship offensive with the standard-wheelbase A1 and A2 Quattros, and by 1982 had already secured the WRC Manufacturers’ Championship. The late, great Finnish driver Hannu Mikkola went on to claim the Drivers’ title in 1983 at the wheel of his A2, and in 1984 the brand swept the board—winning both Drivers’ and Manufacturers’ championships, with legendary Swede Stig Blomqvist crowned world champion in an early short-wheelbase Sport Quattro. But they wanted to go further, faster, higher…

Just 214 examples of the full-size Sport Quattro were ever produced, but in collaboration with Audi, Carisma have secured the licensing rights to reproduce the car in larger numbers at a far more accessible price point and scale. Their passion for all things motorsport and rally shines through in this release: the body has been painstakingly recreated in accurate 1/24 scale, and with 8000 kV brushless power, permanent 4WD, 2S LiPo compatibility, and precise 2.4 GHz FHSS radio gear, it’s the perfect gift for any true petrolhead or a must-have for historic rally enthusiasts worldwide.

Key Features

• New GT24 2.0 Chassis: Redesigned for enhanced stability, durability, and control on any terrain.
• New ARC-24 2-in-One Brushless ESC & Receiver: Efficient, responsive, and seamlessly integrated for smoother performance.
• 3-Wire Servo Friendly: Offers improved compatibility with a wide range of servos for greater precision.
• LiPo Friendly (Up to 7.4V): Run on higher voltage packs for even more power and speed.
• CTX-2000 2.4GHz Radio System
• 7.2V NiMH Battery & USB Charger Included
• 4 x AA Batteries Included
• Officially licensed bodyshell: Lightweight, vacuum-formed body with authentic decals and a classic rally-inspired paint scheme.
• Wheelbase: 121mm
• Size: 210mm x 90mm x 68mm

Left 60 Over Crest, Slow Into Sharp Hairpin Right…

Carisma RC is proud to introduce the GT24 2.0 Subaru Impreza WRC 1999 — the next evolution of our legendary 1/24th scale Micro Rally Car series. Fully licensed by Subaru and packed with upgraded technology, this model brings even more performance, realism, and excitement to your RC experience.

WRC Meets Brushless Micro Perfection

The GT24 2.0 takes everything that made the original great and pushes it further. With a completely redesigned chassis, improved electronics, and new compatibility features, this car isn’t just small — it’s mighty. Whether you’re tearing up your living room or building your own rally stage outdoors, the GT24 2.0 delivers huge fun in a tiny package.

Forget the bland, mass-produced look of other micro RCs — Carisma’s attention to scale detail, performance, and handling sets this car apart from the rest.

Tiny Box, Huge Fun!

The GT24 2.0 Subaru Impreza WRC 1999 is a complete, ready-to-run package — perfect for collectors, enthusiasts, and newcomers to hobby-grade RC alike. Just charge up and hit the stage.

Key Features

• New GT24 2.0 Chassis: Redesigned for enhanced stability, durability, and control on any terrain.
• New ARC-24 2-in-One Brushless ESC & Receiver: Efficient, responsive, and seamlessly integrated for smoother performance.
• 3-Wire Servo Friendly: Offers improved compatibility with a wide range of servos for greater precision.
• LiPo Friendly (Up to 7.4V): Run on higher voltage packs for even more power and speed.
• CTX-2000 2.4GHz Radio System
• 7.2V NiMH Battery & USB Charger Included
• 4 x AA Batteries Included
• Fully Licensed Subaru Impreza WRC 1999 Bodyshell: Lightweight, vacuum-formed body with authentic decals and a classic rally-inspired paint scheme.
• Wheelbase: 121mm
• Size: 210mm x 90mm x 68mm

Get Ready to Rally!

The Carisma GT24 2.0 Subaru Impreza WRC 1999 combines iconic style, cutting-edge technology, and thrilling performance — all in one compact package.

Don’t wait — experience the thrill of rally racing today!

Carisma is thrilled to announce the GT24ST, a cutting-edge 1/24 scale 2WD stadium truck designed for both seasoned enthusiasts and newcomers to the world of remote-controlled vehicles. With a host of innovative features, the GT24ST promises an exhilarating on and off-road experience like no other.

Features

• Independent Suspension: The GT24ST boasts a long independent suspension system that provides exceptional travel and traction across various terrains, ensuring a smooth and controlled ride.
• Rear Motor Configuration: This design enhances weight distribution and handling, allowing for improved performance during high-speed maneuvers.
• 3-Gear Rear Transmission: The advanced transmission system offers smooth shifting and enhances the truck's overall responsiveness.
• Slipper Clutch: The slipper clutch helps to protect the drivetrain, allowing for smoother acceleration while reducing the risk of damage during aggressive driving.
• 3-Wire Servo: Featuring a 3-wire servo setup, the GT24ST ensures precise steering control, giving drivers the confidence to tackle any course.
• ARC-24 2-in-1 Brushless ESC/Receiver: This integrated unit provides reliability and superior performance, ensuring a seamless driving experience.
• 8000KV Motor: With an 8000KV motor as standard, the GT24ST delivers exhilarating speed and power, making it a formidable contender on any track.
• CTX-2000 Radio with 1-2-3 Speed Selector: The GT24ST is equipped with the innovative CTX-2000 radio featuring a 1-2-3 speed selector. This important feature allows drivers to adjust the speed settings according to their skill level. Beginners can start with Speed Selector 1, which provides a manageable pace to build confidence and control. As traction improves and drivers become more comfortable, they can easily switch to higher speed settings for an adrenaline-fueled experience.
• Standard Carisma GT24 Series Battery Compatibility: The GT24ST is designed to seamlessly fit with standard Carisma GT24 series batteries, ensuring hassle-free power management.
• 2S LiPo Friendly: This truck is compatible with 2S LiPo batteries, allowing for enhanced performance and extended run times.
• Retro Style Race Body: The GT24ST features a retro-inspired race body with flame graphics, screen printed to capture the essence of classic racing while providing a striking visual appeal.
• Race-Inspired Tyres: The truck comes with race-inspired front and rear tyres mounted on stylish racing dish wheels, enhancing both performance and aesthetic appeal.

Specifications

Wheel Base: 121mm
Width: 137mm
Length: 185mm ( excluding Wing)
Height: 70mm

Options

• Newly developed Aluminium Oil Shocks
• Aluminium Motor Mount

This is the SE version, with a minor styling update and now comes with some truly iconic styled 5 spoke white wheels and new dirt spec tyres!

As a 1:1 vehicle the Audi Quattro was the first rally car to effectively use all-wheel drive, and would go on to be a benchmark for future cars fitted with such a drive-train. Here at Carisma we decided to make the driving experience as close to the original Group B spec as possible. We've utilized a new 550 Big Can Brushless Motor, offering both RPM and Torque.

To power this we've updated the ESC to our newly developed ARC-3 to allow for the use of 2 or 3S LiPo as standard, and when combined with the 2.4Ghz F.H.S.S Radio Gear and 3 Diff 4WD all metal driveline, offers a robust and true rally driving experience like no other.

The car is a ARR, so just add your own choice of 7.2v NiMH, 7.4v LiPO or 11.1v LiPO. The body has been faithfully reproduced using original design data, and we've ensured it's as accurate as possible, including all the down-force generating aero package, it's SWB dimensions, different screen angle to the LWB Quattro and it's complete replica livery to complete the accurate and truly photo-realistic looks.

1/8th offers a more realistic driving experience and let's you truly see what these vehicles are capable of, right at the heart of the action!

Specifications

Scale: 1:8 - Wheelbase: 285mm - Width: 231mm.
Chassis: LWB with Lightweight G10 Chassis Plates.
Stock Gearing: Spur Gear 44T M1, Motor Pinion 12T M1
Internal Ratio: 15/39
Wheel Hex: 12mm
Driveline: Fully Ball-raced, Dedicated 4WD, Front & Rear Metal Gear Diffs, Center Gear Diff to Maximise both Grip & Power
Motive Power: 550 Can Brushless Power with efficient XT60 Connector
ESC: Brand new Brushless ESC ARC-3 is 3S Friendly
Suspension & Handling: Oil Filled Coil-Over Shocks & Anti-Roll Bar Front & Rear
Wheels: Iconic 5 Spoke White Wheels
Tyres: New Dirt Spec Tyres
Body/Livery: Iconic Audi Sport Quattro S1 Group B rally car factory livery
Radio: Full Sized, Full Function, 2.4Ghz F.H.S.S CTX-8000 Steer-wheel Radio System.

Please Note: This RC Kit does not include batteries and has a maximum compatible battery thickness of 30mm.

Carisma are thrilled to announce the launch of the highly anticipated M48S HKS SKYLINE GT-R Gr.A, a model that pays homage to the legendary BNR32 Skyline GT-R, one of the most iconic vehicles in motorsport history. This release marks a significant collaboration with HKS Japan, renowned for their expertise in performance tuning and motorsport engineering.

The BNR32 Skyline GT-R, first introduced in 1989, quickly became a formidable force in the world of motorsports. With its advanced technology and powerful RB26DETT engine, the GT-R dominated both the Japanese touring car scene and international racing circuits. Its combination of all-wheel drive and precise handling earned it a reputation as one of the best performance cars of its time. The HKS-tuned variants of the BNR32 further pushed the boundaries of speed and performance, solidifying its place in automotive history.

The HKS Skyline GT-R has not only made its mark on the racetrack but has also cultivated a passionate community of enthusiasts and collectors. The tuning potential of the GT-R, especially when partnered with HKS components, has led to numerous victories in various racing championships. These achievements have made the HKS Skyline a symbol of engineering excellence and performance prowess.

Carisma’s collaboration with HKS Japan ensures that the M48S HKS SKYLINE GT-R Gr.A is a faithful reproduction of the original model. Every detail, from the stunning color scheme to the precise logo placements, has been meticulously crafted to reflect the spirit of the classic GT-R. Limited Edition Collectible Limited to just 999 pieces, making it a must-have collectible for enthusiasts and fans alike. To showcase this exceptional model, a dedicated display case will be available, allowing collectors to proudly display the M48S HKS SKYLINE GT-R Gr.A in their home or office.

Features

• LWB with Lightweight 3mm G10 Chassis Plate.
• Gearing Spur Gear 43T M1/Pinion 12T M1.
• Fully Ball-raced, Dedicated 4WD, Front & Rear.
• Metal Gear Diffs, Center Gear Diff to Maximise both Grip & Power.
• 550 Can Brushless Power.
• NEW ARC-3 (3S Friendly) Sensorless Brushless.
• ESC with efficient XT60 Connector.
• Oil Filled Coil-Over Shocks.
• Anti-Roll Bar Front & Rear.
• Racing period Connect 2 piece wheel.
• Racing slick tyres.
• 1990 Nissan Skyline BNR32 Nismo.
• CTX-2000HP High Power Radio System.

Specifications

Wheelbase: 319mm
Width: 231mm
Wheel Hex: 12mm
Radio: Full Sized, Full Function, 2.4Ghz F.H.S.S

Championship-inspired styling meets accessible, full-function RC fun.

Carisma Channels is proud to announce the release of the 90868 1:24 Scale Hyundai i20N Rally1 RC Car – a compact, fully functional radio control model designed to bring rally excitement to younger drivers and new RC enthusiasts.

Finished in a championship-winning Hyundai Motorsport livery, this highly detailed replica combines authentic styling with durable construction and easy-to-use controls, making it perfect for indoor racing and everyday play.

Official Collaboration with Hyundai.

Developed as part of a private label program with Hyundai Motor Company, Carisma received approval to produce additional units and expand distribution through Carisma Channels. The result is an officially styled RC car that captures the look and spirit of a true rally competition machine, while remaining accessible for entry-level users.

Authentic Rally Styling.

The Hyundai i20N Rally1 body is produced to a high standard, drawing inspiration from Carisma’s GT24 Scale 2.0 range. Key features include:

• Vacuum-formed body shell.
• Screen-printed championship livery.
• Accurate sponsor logos and detailed graphics.

The result is a visually striking model that delivers genuine motorsport presence in a compact 1:24 scale format.

Rear-Wheel Drive Performance.

Powered by a rear-wheel drive system, the i20N Rally1 offers responsive and engaging performance. Its balanced setup provides enough power to excite new drivers while remaining easy to control on indoor surfaces such as wooden floors and carpets.

Simple Full-Function Control

Designed with beginners in mind, the model features intuitive full-function control via a gamepad-style transmitter:

• Left stick: Steering (left/right).
• Right stick: Throttle (forward/reverse).

This straightforward layout allows new users to get driving quickly and confidently.

Battery Requirements

• Controller: 2 × AAA batteries.
• Vehicle: 4 × AAA batteries.

Please Note: Batteries not included.

We are excited to unveil the latest iteration of our Official licensed rally car, the Carisma GT24 2.0 M-Sport Puma Hybrid Rally1 2024 Spec. Building on the success of the 2022 model, this new version features significant upgrades and a striking new livery.

Features

• New GT24 2.0 Chassis: Experience enhanced stability and performance with our redesigned chassis, engineered for optimal handling on any terrain.
• New ARC-24 2-in-One Brushless ESC and RX: This innovative system offers seamless integration, improving efficiency and responsiveness during your drives.
• 3 Wire Servo Friendly: Enjoy greater compatibility with your favorite servos, enhancing your control and precision.
• LIPO Friendly Up to 7.4V: Take advantage of higher power options to elevate your racing experience.
• CTX-2000 Radio.
• 7.2V NIMH Included.
• 4 X AA batteries included.
• KD PROPO CTX-2000 2.4GHz Transmitter.
• NEW ARC-24 RX/ESC (Brushless).
• 8000kv Brushless Motor As Standard.
• Low Maintenance Friction Dampers.
• High Traction Rally Tyres.
• Safe 5v USB Charger Included.
• Hobby Grade 3 Wires Steering Servo.
• Officially Licensed Bodyshells.
• Fully Ball Raced 4WD Driveline.
• All ready to go.

Specifications

Wheelbase: 121mm
Width: 89mm

Carisma are thrilled to introduce the GT24 2.0 Official Licensed Subaru Impreza STI 2006 Drift Spec 2! This exciting new model retains all the fantastic features of the GT24 2.0 Puma 2024 while adding unique enhancements tailored for drift enthusiasts.

Get ready to take your drifting to new heights with the GT24 2.0 Official Licensed Subaru Impreza STI 2006 Drift Spec 2. Let the fun begin!

Features

• Locked Differentials: Experience improved control and precision during your drifts, allowing for tighter turns and enhanced performance.
• Injection Moulded Drift Wheels: Designed for optimal grip and style, these wheels make drifting smoother and more enjoyable.
• New Screen Printed Body Shells: Stand out with vibrant colors and stunning designs that capture the essence of the iconic Subaru Impreza STI 2006.
• Set of Cones for Drifting Fun: Practice your drifting skills anywhere—be it your home, living room, bedroom, or office. The only limitation is your imagination!
• New GT24 2.0 Chassis: Experience enhanced stability and performance with our redesigned chassis, engineered for optimal handling on any terrain.
• New ARC-24 2-in-One Brushless ESC and RX: This innovative system offers seamless integration, improving efficiency and responsiveness during your drives.
• 3 Wire Servo Friendly: Enjoy greater compatibility with your favorite servos, enhancing your control and precision.
• LiPo Friendly Up to 7.4V: Take advantage of higher power options to elevate your racing experience.

Other Features

• CTX-2000 Radio.
• 7.2V NIMH Included.
• KD PROPO CTX-2000 2.4GHz Transmitter
• ARC-24 2 in one RX/ESC (Brushless)
• 8000kv Brushless Motor As Standard
• 4 X AA batteries included.
• New front bumper pre-installed.
• Low Maintenance Friction Dampers.
• Locked Differentials.
• Safe 5v USB Charger Included.
• Drift Wheels set.
• Racing Cones set.
• Hobby Grade 3 Wire Steering Servo.
• Officially Licensed Bodyshells.
• Fully Ball Raced 4WD Driveline.
• All ready to go.

Specifications

Wheelbase: 121mm
Width: 89mm

Carisma RC is proud to present a limited edition 1/8 scale replica of the Hyundai i20N Rally1, which made waves in the exhilarating 2024 World Rally Championship (WRC). Driven by the talented Thierry Neuville, who clinched the Drivers’ Championship title, this remarkable vehicle demonstrated exceptional performance throughout the season.

Crafted on the robust M48S Rally Chassis, the model features permanent 4WD with center differentials and specially designed rally tyres, ensuring outstanding traction in diverse conditions. A comprehensive selection of tuning parts is available, enabling enthusiasts to boost speed and cornering capabilities.
As a special bonus, Carisma includes an extra name sticker set for the 2025 Hyundai Drivers, featuring Ott Tänak, who is currently in a fierce battle for the Drivers’ Championship in 2025.

This model is part of a limited production run. Due to our exclusive licensing agreement, only a small quantity will be available, so enthusiasts should act swiftly to secure their unit. When Carisma says it’s limited, it truly is—don’t miss out!

Don’t miss this opportunity to own a piece of rally history with Carisma’s M48S Hyundai i20N Rally1. Order now to ensure you don’t miss this limited edition model!

Features

Wheelbase: 313mm
Width: 231mm
Drive: Permanent 4WD with center differential
Transmission: Full metal transmission
Chassis Plate: 3mm G10 chassis plate
Shocks: Oil-filled shocks all around
Motor: 550 BL motor
Gear Ratio: Revised for higher speed
ESC: 3S Friendly ARC-3 BL ESC
Radio: CTX-2000HP radio
Servo: 6KG full metal gear servo

Specifications

Wheelbase: 313mm
Width: 231mm
Drive: Permanent 4WD with center differential
Transmission: Full metal transmission
Chassis Plate: 3mm G10 chassis plate
Shocks: Oil-filled shocks all around
Motor: 550 BL motor
Gear Ratio: Revised for higher speed
ESC: 3S Friendly ARC-3 BL ESC
Radio: CTX-2000HP radio
Servo: 6KG full metal gear servo

Optional Upgrades

• Full carbon chassis plate.
• Full metal oil-filled shocks.
• CVD's.
• Different tyres.

Carisma is proud to introduce the Honda Civic Type R FL5 on the all-new M40S 2.0 chassis, combining one of the most revered modern performance cars with Carisma’s latest evolution of its proven on-road platform.

The full-size Honda Civic Type R FL5 represents the pinnacle of front-wheel-drive performance engineering. Developed on the racetrack and refined for the road, the FL5 is renowned for its wide stance, aggressive aerodynamics, and uncompromising focus on driver engagement.

The M40S 2.0 marks a significant step forward for Carisma’s popular touring car platform. Building on years of proven performance, this latest version introduces meaningful upgrades to enhance stability, traction, and overall drivability.

At its core is a permanent 4WD drivetrain, now featuring a centre differential derived from the trusted M48S platform, ensuring smooth and consistent power delivery on a wide range of surfaces.

A potent brushless power system, consisting of a Carisma brushless motor and brushless ESC, delivers strong acceleration and impressive topend performance, perfectly matched to the chassis’ balanced layout.

The lightweight carbon composite lower chassis and upper deck provide exceptional rigidity, improving steering response and high-speed stability, while anodised aluminium oil-filled shock absorbers come fitted as standard to absorb bumps and maintain traction. Front and rear anti-roll bars, also included as standard, further enhance cornering control and reduce chassis roll during aggressive driving.

In the spirit of Carisma, every detail of the Civic Type R has been meticulously replicated in this 1/10 scale model. Featuring a performance front injection-molded spoiler and a high downforce rear wing, this Civic is ready to bring the thrill of the Type R experience right into your hands.

Features

• 90% Ready-to-run.
• New M40S 2.0 Chassis.
• Carbon Fibre Chassis and Top Deck.
• Full Ball Bearings.
• Full Metal Geared Differentials.
• Front, Centre and Rear Diffs.
• M1 Module Pinion and Spur Gear.
• Aluminium Oil Filled Shock Absorbers.
• Anti-Roll Bars Front and Rear.
• Adjustable Downstop.
• Fixed Camber Links.
• Racing Slick Tyres.
• 3S Friendly Sensorless Speed Control.
• Sensorless Brushless Motor.
• CTX-2000HP 2.4ghz Radio System.
• 6kg Metal Gear Steering Servo.

Specifications

Track Width: 186mm
Wheelbase: 257mm

Needed To Complete

• 2-3S LiPo Battery.

Officially Licensed Model Features Carisma's Proven M48S Chassis and Nissan's Iconic "Godzilla" Design.

The new M48S Skyline features Carisma's best-selling M48S chassis platform with a number of scale-focused upgrades.

"The Nissan Skyline GT-R NISMO R32 is one of the most iconic JDM performance cars of all time, earning it the legendary 'Godzilla' nickname for its immense power and dominance on the racetrack," said Ivan C. "By pairing our proven M48S platform with an official Nissan license, we've created a model that enthusiasts will be proud to add to their collections."

The Nissan Skyline GT-R R32 was nicknamed "Godzilla" for its sheer dominance in motorsports during the late 1980s and early 1990s. The all-wheel-drive GT-R was virtually unbeatable in touring car and time attack competitions, cementing its status as a motoring icon.

The Carisma M48S Skyline GT-R R32 features several key upgrades over the standard M48S chassis including...

Features

• Injection-molded door mirrors and rear spoiler for added scale detail and aerodynamic performance.
• Gear ratio changes for a more engaging and responsive driving experience.
• Front, middle, and rear full metal gear differentials for superior traction on a variety of surfaces.
• Officially licensed Nissan design elements for the most accurate 1/8 scale BNR32 Nismo representation.
• Period-correct replica wheels for enhanced scale appearance.
• NEW ARC-3 (3S Friendly) Sensorless Brushless ESC with efficient XT60 Connector.

Specifications

Scale: 1:8 - Wheelbase: 319mm - Width: 231mm.
Chassis: LWB with Lightweight 3mm G10 Chassis Plates.
Stock Gearing: Spur Gear 44T M1, Motor Pinion 12T M1.
Wheel Hex: 12mm.
Driveline: Fully Ball-raced, Dedicated 4WD, Front & Rear Metal Gear Diffs, Center Gear Diff to Maximise both Grip & Power. 
Motive Power: 550 Size Sensorless Brushless Power.
Suspension & Handling: Oil Filled Coil-Over Shocks & Anti-Roll Bar Front & Rear.
Wheels: light weight racing period Connect injection moulded 2 piece wheel.
Tires: Street Spec tires.
Body/Livery: 1990 Nissan Skyline BNR32 Nismo.
Radio: Full Sized, Full Function, 2.4Ghz F.H.S.S CTX-8000 Radio System.

Please Note: This RC Kit does not include batteries and has a maximum compatible battery thickness of 30mm.