RC Vehicles

Fits

• RB10

Fits

• RB10

The Pro2 SC10SW short course truck is based on the 9-time ROAR Short Course National Championship-winning trucks, featuring a water-resistant high-power Reedy brushless speed control and 3300kV brushless motor, a 2.4GHz 2-channel radio system as well as our DVC (Dynamic Vehicle Control) receiver unit with built-in adjustable digital gyro. Add to that a Reedy Power metal-gear, digital high-torque servo and a water-resistant enclosed receiver box. All of this packaged together in an outstanding factory-finished blue and white body. And to keep you sticking to the terrain, this SC10SW short wheelbase beast will keep you cornering with the included high-grip all-terrain tyres and lightweight wheels. The time for tearing up the track is now.

Team Associated’s new Pro2 SC10SW short course truck is a detailed and fun-to-drive Ready-to-Run RC truck. Based on our championship-winning Short Course truck, the Pro2 SC10SW features some of the latest features in racing. A durable lightweight aluminium top shaft, rugged steel turnbuckles and adjustable suspension geometry give the Pro2 SC10SW the ultimate in handling on all terrain. This makes it a perfect platform for short course racing!

Features

• Durable and lightweight aluminium top shaft.
• Low center-of-gravity molded composite chassis with hook-and-loop battery straps that accommodate both NiMH and 2S and 3S LiPo battery packs.
• Metric hardware throughout.
• 22 precision rubber-sealed ball bearings.
• Impact-absorbing front and rear bumpers.
• Adjustable body mounts.
• Rear CVA drive shafts for more reliability.
• 2.6:1 ratio gearbox with heavy-duty sealed gear differential and externally adjustable slipper clutch.
• Rugged steel turnbuckles for adjustable camber and front toe-in.
• Adjustable suspension geometry.
• Vertical ball ends for roll center adjustments, front and rear.

Specifications

Power Source: Electric
Terrain: Off-Road
Body Style: Truck
Scale Size: 1:10 Scale
Assembly Level: Ready-To-Run*
Length: 492.4mm (19.39in)
Width: 252mm (9.92in)
Wheelbase: 227.8mm (8.97in)
Weight: Varies
Internal Gear Ratio: 2.6:1
Drive: 2WD

Please Note: *This vehicle is fully assembled and ready to run right out of the box but does require a battery and/or charger.

Required To Complete

• Four AA batteries for radio.
• Suitable NiMh or 2S/3S LiPo battery (Reedy Part AS751) for vehicle.
• Charger (Reedy Part AS27201).

The Pro2 SC10SW short course truck is based on the 9-time ROAR Short Course National Championship-winning trucks, featuring a water-resistant high-power Reedy brushless speed control and 3300kV brushless motor, a 2.4GHz 2-channel radio system as well as our DVC (Dynamic Vehicle Control) receiver unit with built-in adjustable digital gyro. Add to that a Reedy Power metal-gear, digital high-torque servo and a water-resistant enclosed receiver box. All of this packaged together in an outstanding factory-finished blue and white body. And to keep you sticking to the terrain, this SC10SW short wheelbase beast will keep you cornering with the included high-grip all-terrain tyres and lightweight wheels. The time for tearing up the track is now.

Team Associated’s new Pro2 SC10SW short course truck is a detailed and fun-to-drive Ready-to-Run RC truck. Based on our championship-winning Short Course truck, the Pro2 SC10SW features some of the latest features in racing. A durable lightweight aluminium top shaft, rugged steel turnbuckles and adjustable suspension geometry give the Pro2 SC10SW the ultimate in handling on all terrain. This makes it a perfect platform for short course racing!

Features

• Durable and lightweight aluminium top shaft.
• Low center-of-gravity molded composite chassis with hook-and-loop battery straps that accommodate both NiMH and 2S and 3S LiPo battery packs.
• Metric hardware throughout.
• 22 precision rubber-sealed ball bearings.
• Impact-absorbing front and rear bumpers.
• Adjustable body mounts.
• Rear CVA drive shafts for more reliability.
• 2.6:1 ratio gearbox with heavy-duty sealed gear differential and externally adjustable slipper clutch.
• Rugged steel turnbuckles for adjustable camber and front toe-in.
• Adjustable suspension geometry.
• Vertical ball ends for roll center adjustments, front and rear.

Specifications

Power Source: Electric
Terrain: Off-Road
Body Style: Truck
Scale Size: 1:10 Scale
Assembly Level: Ready-To-Run*
Length: 492.4mm (19.39in)
Width: 252mm (9.92in)
Wheelbase: 227.8mm (8.97in)
Weight: Varies
Internal Gear Ratio: 2.6:1
Drive: 2WD

Please Note: *This vehicle is fully assembled and ready to run right out of the box but does require a battery and/or charger.

Required To Complete

• Four AA batteries for radio.
• Suitable NiMh or 2S/3S LiPo battery (Reedy Part AS751) for vehicle.
• Charger (Reedy Part AS27201).

The Street Stock Dirt Oval Ready-to-Run SR10M puts you in control of all the adrenaline-pumping excitement of dirt, clay, and pavement racing in 1:10 scale. Despite sometimes flying under the radar in mainstream racing circles, dirt track racing stands as one of the most thrilling spectacles in motorsports. Set against the backdrop of oval tracks covered in dirt or clay, these competitions offer an electrifying showcase of tire-scorching action. With countless venues spread across the United States, enthusiasts and fans alike flock to these weekly gatherings year-round, drawn by the irresistible allure of high-speed showdowns and heart-stopping finishes. Whether you're behind the wheel or cheering from the stands, Street Stock Dirt Oval Racing promises an unforgettable experience where passion meets performance at every turn.

The SR10M Dirt Oval Race Car represents years of championship-winning design, drawing inspiration from the lineage of the 9-time ROAR Short Course National Championship trucks. At its heart lies a 3300kV brushless motor and a water-resistant high-power Reedy brushless speed control. Commanding control is assured through the included 2.4GHz 2-channel radio system. A high-torque digital metal gear servo and a water-resistant enclosed receiver box, ensure reliability even in the most demanding conditions. Wrapped in a striking factory-finished body, the SR10M exudes both style and substance. Traction is optimized with the high-grip street stock-inspired treaded tires and lightweight wheels, ensuring maximum grip and agility through every corner. Unleash the full potential of your racing prowess with the SR10M Dirt Oval Race Car, where performance meets perfection.

Features

• 2.4GHz 4-channel radio with digital frequency hopping system
• High-torque digital metal gear servo
• Powerful Reedy 3300kV brushless motor
• Water-resistant high-power Reedy brushless speed control with T-plug connector and LiPo low voltage cutoff
• Factory-finished Street Stock body with integrated rear spoiler
• Lightweight Street Stock-inspired wheels
• High-grip tires with Street Stock-inspired tread pattern
• Impact-absorbing front bumper
• Aluminium 12mm coil-over shock absorbers
• Durable and lightweight aluminum top shaft
• New mid-motor low center-of-gravity G10 fiberglass chassis with updated O-Ring battery straps that accommodate 2S LiPo battery packs
• Updated mid-motor rear carbon fiber shock tower
• New carbon fiber chassis side braces
• Updated rear toe block for Dirt Oval racing
• Adjustable body mounts
• Rear CVA drive shafts for more reliability
• 2.6:1 ratio gearbox with heavy-duty sealed gear differential and externally adjustable slipper clutch
• Rugged steel turnbuckles for adjustable camber and front toe-in
• Adjustable suspension geometry
• Vertical ball ends for roll center adjustments, front and rear
• Many Factory Team options already available!
• Metric hardware throughout
• 24 precision rubber-sealed ball bearings

Specifications

Power Source: Electric
Terrain: Off-Road
Body Style: Oval/Late Model
Scale Size: 1:10 Scale
Assembly Level: Ready-To-Run*
Length: 536.4mm (21.12in)
Width: 250mm (9.84in)
Wheelbase: 277.8mm (10.94in)
Weight: 1424g (3.14lbs)
Internal Gear Ratio: 2.6:1
Drive: 2WD

* This vehicle is fully assembled and ready to run right out of the box but does require a battery and/or charger.

Required To Complete

• 7.4V-7.6V 2S LiPo with "shorty" battery dimensions (standard or low-profile height)
• Battery charger
• 4 x AA batteries

Four-time Lucas Oil Off Road Racing Series (LOORRS) champion, Ryan Beat, lives for competition. For the last decade, Ryan has raced at short course tracks across the U.S., claiming records, wins, championships, and winning the hearts of fans. Ryan Beat started Ryan Beat Motorsports (R/BM) in 2015 with his dad, a few friends, and a passion for racing. Ryan built a PRO-LITE truck and went full-time racing in the Lucas Oil Off Road Racing Series (LOORRS). Since then, R/BM has grown to a multi-truck team, with a state-of-the-art 15,000 sq. ft. facility.

The R/BM team is the largest team currently racing in the Championship Off-Road Series with entries in the PRO2, PRO-LITE, and PRO-SPEC classes. As a four-time champion himself, Ryan is committed to performance, and attributes the growth and success of the team to a world-class sponsorship base. R/BM is proud to support its partners with on-track performance and best-in-class marketing services.

Built on hard work, determination, and a passion for racing, R/BM has built a winning reputation and is known as a leader in the off-road racing community. Stay tuned as the team expands its racing footprint into other series.

Team Associated's new Pro2 LT10SW short course truck is a highly detailed and fun-to-drive Ready-to-Run RC truck. Based on our championship-winning Short Course truck, the Pro2 LT10SW features some of the latest features in racing. A durable lightweight aluminum top shaft, rugged steel turnbuckles and adjustable suspension geometry give the Pro2 LT10SW the ultimate in handling on all terrain. This makes it a perfect platform for short course racing!

Please Note: This vehicle needs extra parts to make it operational such as batteries and charger.

Features

• Durable and lightweight aluminum top shaft
• Low center-of-gravity molded composite chassis with hook-and-loop battery straps that accommodate both NiMH and 2S and 3S LiPo battery packs
• Metric hardware throughout
• 22 precision rubber-sealed ball bearings
• Impact-absorbing front and rear bumpers
• Adjustable body mounts
• Rear CVA drive shafts for more reliability
• Aluminum 12mm big bore coil-over shock absorbers
• 2.6:1 ratio gearbox with heavy-duty sealed gear differential and externally adjustable slipper clutch
• Rugged steel turnbuckles for adjustable camber and front toe-in
• Adjustable suspension geometry
• Vertical ball ends for roll center adjustments, front and rear

Specifications

Power Source: Electric
Terrain: Off-Road
Body Style: Truck
Scale Size: 1:10 Scale
Assembly Level: Ready-To-Run*
Length: 492.4mm (19.39in)
Width: 252mm (9.92in)
Wheelbase: 227.8mm (8.97in)
Weight: Varies
Internal Gear Ratio: 2.6:1
Drive: 2WD

* This vehicle is fully assembled and ready to run right out of the box but does require a battery and/or charger.

Required To Complete

• Four AA batteries for radio-controlled car radio
• Suitable NiMH or 2S or 3S LiPo battery for electric RC car
• Charger suitable for chosen battery

Rat Rods, Street Rods and Hot Rods

A culture of enthusiasts that modify their older coupes' weight for reduction, improve vehicle aerodynamics, and tune their engines to produce more power. Becoming popular after World War II, these heavy, older cars underwent drastic surgery to chop their tops, lower and slope their windshields backward, and compete in speed contests.

The passion for these rods still lives today and Team Associated pays tribute to the genre with the Pro2 RT10SW rat rod, which is based on the 9-time ROAR Short Course National Championship-winning trucks, featuring a water-resistant high-power Reedy brushless speed control and 3300kV brushless motor, a 2.4GHz 2-channel radio system as well as our DVC (Dynamic Vehicle Control) receiver unit with built-in adjustable digital gyro. Add to that a Reedy metal-gear digital high-torque servo and a water-resistant enclosed receiver box--all of this packaged together in an outstanding factory-finished body. The RT10SW beast will keep you cornering with the included high-grip all-terrain tires and lightweight wheels.

Pro2 RT10SW

Team Associated's Pro2 RT10SW is a highly detailed and fun-to-drive Ready-to-Run RC Rat Rod. Based on our championship-winning short course truck, the Pro2 RT10SW features some of the latest features in racing. A durable, lightweight aluminum top shaft, rugged steel turnbuckles, and adjustable suspension geometry give the Pro2 RT10SW the ultimate in handling on all terrain!

Please Note: This vehicle needs extra parts to make it operational such as batteries and charger.

Features

• 2.6:1 ratio gearbox with heavy-duty sealed gear differential and externally adjustable slipper clutch
• Durable and lightweight aluminum top shaft
• Low center-of-gravity molded composite chassis with hook-and-loop battery straps that accommodate both NiMH and 2S or 3S LiPo battery packs
• Impact-absorbing front and rear bumpers
• Adjustable body mounts
• Rear CVA drive shafts for more reliability
• Aluminum 12mm big bore coil-over shock absorbers
• Rugged steel turnbuckles for adjustable camber and front toe-in
• Adjustable suspension geometry
• Vertical ball ends for roll center adjustments, front and rear
• Metric hardware throughout
• 22 precision rubber-sealed ball bearings

Specifications

Power Source: Electric
Terrain: On-Road
Body Style: Other
Scale Size: 1:10 Scale
Assembly Level: Ready-To-Run*
Length: 492.4mm (19.39in)
Width: 252mm (9.92in)
Wheelbase: 277.8mm (10.94in)
Weight: varies
Internal Gear Ratio: 2.6:1
Drive: 2WD

* This vehicle is fully assembled and ready to run but does require a battery and/or charger.

Required To Complete

• Four AA batteries for radio-controlled car radio
• Suitable NiMh or 2S or 3S LiPo RC car battery
• Radio control battery charger

Short Course Racing--All the dirt, clay and pavement-racing excitement in a 1:10 scale RTR!

The Pro2 LT10SW short course truck is based on the 9-time ROAR Short Course National Championship-winning trucks, featuring a water-resistant high-power Reedy brushless speed control and 3300kV brushless motor, a 2.4GHz 2-channel radio system as well as our DVC (Dynamic Vehicle Control) receiver unit with built-in adjustable digital gyro. Add to that a Reedy Power metal-gear, digital high-torque servo and a water-resistant enclosed receiver box. All of this packaged together in an outstanding factory-finished blue and white body. And to keep you sticking to the terrain, this LT10SW short wheelbase beast will keep you cornering with the included high-grip all-terrain tires and lightweight wheels. The time for tearing up the track is now!

Team Associated's new Pro2 LT10SW short course truck is a detailed and fun-to-drive Ready-to-Run RC truck. Based on our championship-winning Short Course truck, the Pro2 LT10SW features some of the latest features in racing. A durable lightweight aluminum top shaft, rugged steel turnbuckles and adjustable suspension geometry give the Pro2 LT10SW the ultimate in handling on all terrain. This makes it a perfect platform for short course racing!

Please Note: This vehicle needs extra parts to make it operational such as a motor and battery pack.

Features

• Durable and lightweight aluminum top shaft
• Low center-of-gravity molded composite chassis with hook-and-loop battery straps that accommodate both NiMH and 2S and 3S LiPo battery packs
• Metric hardware throughout
• 22 precision rubber-sealed ball bearings
• Impact-absorbing front and rear bumpers
• Adjustable body mounts
• Rear CVA drive shafts for more reliability
• Aluminum 12mm big bore coil-over shock absorbers
• 2.6:1 ratio gearbox with heavy-duty sealed gear differential and externally adjustable slipper clutch
• Rugged steel turnbuckles for adjustable camber and front toe-in
• Adjustable suspension geometry
• Vertical ball ends for roll center adjustments, front and rear

Specifications

Power Source: ElectricTerrain: Off-RoadBody Style: TruckScale Size: 1:10 ScaleAssembly Level: Ready-To-Run*Length: 492.4mm (19.39in)Width: 252mm (9.92in)Wheelbase: 227.8mm (8.97in)Weight: variesInternal Gear Ratio: 2.6:1Drive: 2WD

* This vehicle is fully assembled and ready to run right out of the box. Some models may require a battery and/or charger.

Required to Complete

• Four AA batteries for radio
• Suitable NiMH or 2S/3S LiPo battery for vehicle
• Charger suitable for chosen battery

Team Associated's Pro2 SC10 Method Race Wheels is a Ready-To-Run RC electric truck based on the 10-time R.O.A.R. winning Short Course National Champion. The Pro2 SC10 includes a water-resistant, high-power Reedy brushless speed control, Reedy 3300kV brushless motor, and a water-resistant, enclosed receiver box. The suspension includes adjustable blue anodized aluminum V2 12mm big bore coil-over shocks. The gearbox comes with a heavy-duty sealed-gear differential and the externally adjustable V2 slipper clutch. CVA driveshafts are included. The short course hex-drive wheels come standard on the Pro2 SC10 with realistic off-road wheels and tires to keep the truck gripping the ground.

Method Race Wheels designs, develops, and distributes high-performance wheels and accessories for race and street applications. Racing enthusiasts and participants...always driven to look beyond conventional ideas of industry standards. Engineering, rigorous testing, data collection and proven performance defines Method Race Wheels...Lighter. Stronger. Faster.

Features

• 2-channel 2.4GHz radio with a DVC (Dynamic Vehicle Control) receiver featuring a built-in adjustable gyro
• High-torque, metal-gear Reedy servo with spring-style servo saver
• Powerful Reedy 3300kV brushless motor
• Water-resistant, high-power Reedy brushless speed control with T-plug connector and LiPo low-voltage cutoff
• Factory-finished short-course body with Method Race Wheels livery
• Water-resistant enclosed receiver box
• Durable and lightweight aluminum top shaft
• Low center-of-gravity molded composite chassis with hook-and-loop battery straps that accommodate both NiMH and 2-3s LiPo battery packs
• Durable front and rear body mounts
• Rear CVA drive shafts for more reliability
• Aluminum 12mm big-bore, coil-over shock absorbers
• 2.6:1 ratio gearbox with heavy-duty sealed gear differential and externally adjustable V2 slipper clutch
• Rugged steel turnbuckles for adjustable camber and front toe-in
• Fully adjustable suspension geometry
• Vertical ball ends for roll center adjustments, front and rear
• Metric hardware throughout
• 14 precision rubber-sealed ball bearings
• Many Factory Team options already available!

Specifications

Power Source: Electric
Terrain: Off-Road
Body Style: Truck
Scale Size: 1:10 Scale
Assembly Level: Ready-To-Run*
Length: 538mm (21.18in)
Width: 282mm (11.1in)
Wheelbase: 322mm (12.68in)
Weight: 1929g (4.25lbs)
Internal Gear Ratio: 2.6:1
Drive: 2WD

Please Note: * This vehicle is fully assembled and ready to run right out of the box, but requires a battery and a charger.

Team Associated's Pro2 SC10 is a Ready-To-Run RC replica of the Pro 2 trucks driven in Off Road Racing. The Pro2 SC10 features a rear motor short-course chassis that uses many of the same parts from the widely successful RC10SC5M platform. Adjustable aluminum big-bore, coil-over shocks, a sealed-gear differential, and heavy-duty CVA driveshafts are all features that come standard on the Pro2 SC10. A powerful water-resistant Reedy electronic speed controller and 3300kV electric motor power the Pro2 SC10 for hours of high-speed fun. To handle the power, the Pro2 SC10 comes equipped with realistic MethodTM Race Wheels and tires specifically made to handle any off-road condition.

A 2-channel 2.4GHz radio system featuring a DVC (Dynamic Vehicle Control) receiver also comes standard in the Pro2 SC10. Protected by the water-resistant enclosed receiver box, the DVC system improves stability in all terrain conditions by automatically counter-steering when the vehicle starts to slide. With a metal-gear, high-torque Reedy servo rounding out the electronics package, the Pro2 SC10 is nothing short of a success in RC off-road racing.

Features

• Based on the 9-time R.O.A.R. National Champion short-course race truck platform
• 2-channel 2.4GHz radio with a DVC (Dynamic Vehicle Control) receiver featuring a built-in adjustable gyro
• High-torque, metal-gear Reedy servo with spring-style servo saver
• Powerful Reedy 3300kV brushless motor
• Water-resistant, high-power Reedy brushless speed control with T-plug connector and LiPo low-voltage cutoff
• Factory-finished short-course racing truck body
• Water-resistant enclosed receiver box
• Durable and lightweight aluminum top shaft
• Low center-of-gravity molded composite chassis with hook-and-loop battery straps that accommodate both NiMH and 2/3s LiPo battery packs
• Durable front and rear body mounts
• Rear CVA drive shafts for more reliability
• Aluminum 12mm big-bore, coil-over shock absorbers
• 2.6:1 ratio gearbox with heavy-duty sealed gear differential and externally adjustable V2 slipper clutch
• Rugged steel turnbuckles for adjustable camber and front toe-in
• Fully adjustable suspension geometry
• Vertical ball ends for roll center adjustments, front and rear
• Metric hardware throughout
• 14 precision rubber-sealed ball bearings
• Many Factory Team options already available!

Specifications

Power Source: Electric
Terrain: Off-Road
Body Style: Truck
Scale Size: 1:10 Scale
Assembly Level: Ready-To-Run*
Length: 538mm (21.18in)
Width: 282mm (11.1in)
Wheelbase: 322mm (12.68in)
Weight: 1928g (4.25lbs)
Internal Gear Ratio: 2.6:1
Drive: 2WD

* This vehicle is fully assembled and ready to run right out of the box. Some models may require a battery and/or charger.

Required To Complete

• (4) AA batteries used in the transmitter
• NiMH or LiPo battery with High Current T-Plug
• Charger for battery

Fits

• RC10 ''91 Stealth Car

Fits

• MT12 Monster Truck

The CR12 Trail Series Scale 4x4 truck may be small in size, but is packed full of features. This rig comes Ready-To-Run with Reedy Power electronics and meets S.O.R.R.C.A. class 1 and 2 rules right out of the box. No need to prep or build your rig; just charge it and you’re ready to hit the trails!

Designed not only for scale looks with realistic wheels, tyres and body, the CR12 is built for performance as well. The steel ladder frame chassis provides the perfect backbone for this rugged little rig. The 4-link suspension, threaded shocks, and soft rubber tires give the grip and performance needed to climb over the roughest terrain. Transferring power to the rocks is a compact 3-gear transmission, plastic low-friction slider-type drive shafts, front steel CVA axles, and metal shield ball bearings.

Get ready to hit the trails with the CR12 scale 4x4 truck!

Features

• Off road style front bumper
• Metal front CVA and rear solid axle shafts with 12mm hex adapters
• Metal 4-link front and rear suspension
• Fully adjustable threaded fluid filled shocks
• Chassis mounted steering (CMS) servo
• 13.98:1 Ratio 3-gear transmission with integrated motor mount
• Plastic low-friction slider-type drive shafts
• 16-piece metal shield ball bearing set
• 2.4GHz XP transmitter and receiver
• Water resistant Reedy Power speed control with high-current T-plug connector
• Reedy brushed 380 motor
• 850mah Li-Ion 7.4V 2-cell battery and charger
• Black anodized aluminum battery/radio tray with hook and loop hold down strap
• Black scale 1.9 wheels with soft compound off road tires

CR12 Electronics

• 4GHz XP transmitter and receiver
• Water resistant Reedy Power speed control with high-current T-plug connector
• 850mah Li-Ion 7.4V 2-cell battery and charger
• Reedy brushed 380 motor
• Chassis mounted steering (CMS) servo

Other Helpful Items

• Silicone Shock Fluid (Refer to catalog for complete listings)
• Body Scissors (AE Part AS1737)
• FT Wrench Set (AE Part AS1519)

Specifications

Power Source: Electric
Terrain: Off-Road
Body Style: Truck
Scale Size: 1:12 Scale
Assembly Level: *Ready-To-Run
Length: 372mm (14.65in)
Width: 178mm (7.01in)
Wheelbase: 225mm (8.86in)
Weight: 1110g (2.45lbs)
Internal Gear Ratio: 13.98:1
Drive: 4WD

Please Note*: This vehicle is fully assembled and ready to run right out of the box, but does require a battery and charger.

Required to Complete

• 4 x AA batteries for transmitter

Get ready for heart-pounding excitement at a stadium near you with the MT12+ Lux 4x4 Monster Truck! Despite its compact size, this powerhouse is packed with state-of-the-art features that’ll leave you breathless. Thanks to Reedy Power electronics, this beast comes fully equipped and Ready-To-Run straight out of the box. Say goodbye to tedious prep work and hello to instant adrenaline-fueled action!

Not just a looker, the MT12+ Lux 4x4 is built to dominate the arena with its realistic chrome wheels, chevron-style tyres, and eye-catching pre-printed body. Its steel ladder frame chassis forms the sturdy foundation for epic car-crushing endeavors. With a 4-link suspension, threaded shocks, and grippy rubber tires, this monster truck is ready to conquer any terrain – be it soaring over cars or tearing through dirt and mud. And with its compact 3-gear transmission, low-friction slider-type drive shafts, steel CVA axles, and metal-shield ball bearings, this little giant delivers power and performance like no other. Get ready to experience the thrill of the MT12+ Lux 4x4 Monster Truck – where you’ll only need the edge of your seat!

Features

• Open front and rear differentials
• Steel pivot balls
• Steel 4-link bars
• Servo-on-chassis steering
• Steel C-channel frame rails
• Servo saver
• Oil-filled shocks with threaded shock bodies
• Adjustable shock holes on towers
• Aluminum wheel hexes
• Adjustable front and rear body posts
• Metal front CVA and rear solid axle shafts with 12mm hex adapters
• Black anodized aluminum battery/radio tray with hook and loop hold-down strap
• Plastic, low-friction, slider-type drive shafts
• 16-piece metal-shield ball bearing set
• 2.4GHz XP transmitter and receiver
• Reedy Power speed control with high-current T-plug connector
• Reedy brushed 400 motor, 3300 RPM
• 1500mAh Li-Ion 7.4V 2-cell battery and charger
• Precision steel ring and pinion gears

Specifications

Power Source: Electric
Terrain: Off-Road
Body Style: Truck
Scale Size: 1:12 Scale
Assembly Level: Ready-To-Run*
Length: 393mm (15.47in)
Width: 274mm (10.79in)
Wheelbase: 247mm (9.72in)
Weight: Varies
Internal Gear Ratio: 13.98:1
Drive: 4WD

* This vehicle is fully assembled and ready to run right out of the box. Some models may require a battery and/or charger.

Required to Complete

• Four AA batteries for radio

Coming to a stadium near you, the MT12 Monster Series 4x4 Monster Van may be small in size, but it's jam-packed full of incredible features! Equipped with Reedy Power electronics, this rig comes Ready-To-Run with everything you need right out of the box. No need to prep or build your rig; just charge it and you're ready for some pedal-to-the-metal, car-crushing action!

Designed not only for scale looks with realistic chrome wheels, chevron-style tires, and retro-styled van body, the MT12 is built for car-stomping action as well. The steel ladder frame chassis provides the perfect backbone for this rugged little monster. The 4-link suspension, threaded shocks, and soft rubber tires give the grip and performance needed to smash over cars or through dirt and mud. Transferring power to the ground is a compact 3-gear transmission, plastic low-friction slider-type drive shafts, front steel CVA axles, and metal-shield ball bearings.

With the MT12 4x4 Monster Van, you'll pay for the whole seat, but you'll only need the edge!

Features

• Open front and rear differentials
• Steel pivot balls
• Steel 4-link bars
• Servo on chassis steering
• Steel C-channel frame rails
• Servo saver
• Oil-filled shocks with threaded shock bodies
• Adjustable shock holes on towers
• Aluminum wheel hexes
• Adjustable front and rear body posts
• Metal front CVA and rear solid axle shafts with 12mm hex adapters
• Black anodized aluminum battery/radio tray with hook-and-loop hold-down strap
• Plastic low-friction slider-type drive shafts
• 16-piece metal-shield ball bearing set
• 2.4GHz XP transmitter and receiver
• Reedy Power speed control with high-current T-plug connector
• Reedy brushed 380 motor
• 850mAh Li-Ion 7.4V 2-cell battery and charger

Specifications

Power Source: Electric
Terrain: Off-Road
Body Style: Monster Truck
Scale Size: 1:12 Scale
Assembly Level: Ready-To-Run*
Length: 380mm (14.96in)
Width: 278mm (10.94in)
Wheelbase: 236mm (9.29in)
Weight: 1110g (2.45lbs)
Internal Gear Ratio: 13.98
Drive: 4WD

* This vehicle is fully assembled and ready to run right out of the box.

Required to Complete

• AA batteries for the radio

Coming to a stadium near you, the MT12 Monster Series 4x4 Monster Truck may be small in size, but is jam-packed full of incredible features! Equipped with Reedy Power electronics, this rig comes Ready-To-Run with everything you need right out of the box. No need to prep or build your rig; just charge it and you're ready for some pedal-to-the-metal car-crushing action!

Designed not only for scale looks with realistic chrome wheels, chevron-style tires, and retro-styled monster truck body, the MT12 is built for car-stomping action as well. The steel ladder frame chassis provides the perfect backbone for this rugged little monster. The 4-link suspension, threaded shocks, and soft rubber tires give the grip and performance needed to smash over cars or through dirt and mud. Transferring power to the ground is a compact 3-gear transmission, plastic low-friction slider-type drive shafts, front steel CVA axles, and metal-shield ball bearings.

With the MT12 4x4 Monster Truck, you'll pay for the whole seat, but you'll only need the edge!

Features

• Chassis Mounted Steering (CMS) servo
• Fully adjustable threaded fluid-filled shocks
• Metal front CVA axle shafts
• 13.98:1 ratio 3-gear transmission with integrated motor mount
• Includes 2.4GHz XP transmitter, receiver, Reedy Power water-resistant speed control, 380 motor, servo, and 850mAh Li-Ion battery
• Metal 4-Link front and rear suspension
• Roof-mounted chrome light bar is LED-ready (LEDs sold separately)
• Injection-molded chrome grill and body accessories
• Open front and rear differentials
• Steel pivot balls
• Steel 4-link bars
• Steel C-channel frame rails
• Servo saver
• Oil-filled shocks with threaded shock bodies
• Adjustable shock holes on towers
• Aluminum wheel hexes
• Adjustable front and rear body posts
• Metal front CVA and rear solid axle shafts with 12mm hex adapters
• Black anodized aluminum battery/radio tray with hook and loop hold-down strap
• Plastic low-friction slider-type drive shafts
• 16-piece metal-shield ball bearing set
• 2.4GHz XP transmitter and receiver
• Reedy Power speed control with high-current T-plug connector
• Reedy brushed 380 motor
• 850mAh Li-Ion 7.4V 2-cell battery and charger
• AA batteries required for transmitter (sold separately)

Specifications

Power Source: Electric
Terrain: Off-Road
Body Style: Truck
Scale Size: 1:12 Scale
Assembly Level: Ready-To-Run*
Length: 380mm (14.96in)
Width: 278mm (10.94in)
Wheelbase: 236mm (9.29in)
Weight: 1110g (2.45lbs)
Drive: 4WD

* This vehicle is fully assembled and ready to run right out of the box. Some models may require a battery and/or charger.

Required to Complete

• 4 x AA batteries for transmitter

Fits

• Apex 2

The DC10 RTR – Where Going Sideways Becomes an Art Form!

Since 1964, Team Associated has proven to be the leader in the world of competition racing, and now we’re pushing the envelope even further with our RC Drift Car: the DC10! Born from our on-road racing legacy, our Area 51 engineers have engineered a drift machine that sets new standards.

In the thrilling world of RC drifting, balance is everything, and the DC10 delivers precision like never before. With an arsenal of suspension and chassis tuning options at your fingertips, you can fine-tune your ride to perfection. From camber and caster adjustments to kingpin inclination (KPI) and the exact placement of your motor, servo and battery, the Team Associated DC10 1:10 RWD RTR is designed to give you the ultimate drifting experience.

But that’s not all—the DC10 RTR Drift Car comes with a high-performance 3300kV Reedy brushless motor system, set up in a sleek low motor configuration for maximum speed and control. Plus, upgrading and customizing your DC10 is a breeze with a full range of optional and Factory Team parts that fit seamlessly onto the DC10 RTR Drift Car.

For those who crave unbeatable control and stability, the DC10 is equipped with Team Associated’s brand-new competition Drift Tires and a precision-tunable gyro to keep you glued to the track.

Whether you’re a seasoned drifter or just starting to explore the exhilarating world of RC drifting, the DC10 RTR is your ticket to one of the fastest-growing categories in RC racing. Get ready to drift into the action with Team Associated’s DC10!

Features

• 2.5mm G10 chassis and top plate
• Adjustable battery placement
• Fully tunable Ackermann plates
• Easy-to-adjust camber
• High and low motor mounting capabilities
• Adjustable offset wheel hexes
• Adjustable servo mount locations
• Precision rubber-sealed ball bearings throughout
• Rear mounted electronic speed control (ESC) plate
• Adjustable rear anti-squat and toe-in
• 3300kV brushless motor included
• Precision Reedy drift RTR servo
• 2.4ghz transmitter and receiver
• Fully adjustable competition Gyro installed
• New Exclusive Grey Parts
• Competition Team Associated drift tires included
• Detailed, painted Body with body accessories

Specifications

Power Source: Electric
Terrain: On-Road
Body Style: Other
Scale Size: 1:10 Scale
Assembly Level: Ready-To-Run*
Width: Varies
Wheelbase: 257mm (10.12in)
Weight: Varies
Internal Gear Ratio: 2.6:1
Drive: 2WD

*This vehicle is fully assembled and ready to run right out of the box, but does require a battery and charger.

Needed To Complete

• 7.4V-7.6V 2S LiPo with “shorty” battery dimensions (standard or low-profile height)
• Battery charger
• 4 x AA batteries
• AS30133C DC10 RTR Combo Comes with Reedy Battery and Charger

Other Helpful Items

• Silicone Shock Fluid (Refer to catalog for complete listings)
• Silicone Diff Fluid (Refer to catalog for complete listings)
• Body Scissors (AE Part AS1737)
• Easy-to-adjust camber
• FT Wrench Set (AE Part AS1519)
• Hobby Knife
• Needle Nose Pliers
• Wire Cutters
• Soldering Iron
• Calipers or a Precision Ruler

Team Associated's all-new ST550 Super Touring Race Car is a highly detailed and fun-to-drive Ready-to-Run RC car. Built on a budget-friendly Apex2 Sport chassis, the ST550 includes some of the latest features in racing. A front and rear independent suspension with coil-over shocks and active rear toe give the Apex2 Sport the ultimate in handling on uneven tarmac. This makes it a perfect platform for the Super Touring race class!

Super Touring Racing

Super Touring is a segment of motorsports that got its start in the mid-90s. These cars were based on production road cars with extensive modifications made for racing. It quickly became popular among motorsport enthusiasts and RC racers alike. Many RC manufacturers jumped on the popularity of this new class of racing, with Team Associated's entry being the TC3 back in 1999.

Fast-forward to today and the Super Touring class, now called "New Generation V8 Supercar," is still popular. Once again Team Associated has jumped into this popular class, this time with the Apex2 Sport ST550 Super Touring Car chassis. The ST550 features realistic race car looks, such as injection-molded disk brakes, spoiler, mirrors, and race-inspired graphics.

Please Note: This vehicle needs extra parts to make it operational such as motor and battery pack.

Features

• Steel dog bones and drive axles
• Sealed front and rear gear differentials
• Adjustable hook and loop battery straps
• Injection-molded brake calipers and rotors
• Aluminum motor plate
• Adjustable shock mounting locations
• Bolt-on steering plates
• Molded one-piece tie rods and steering links
• Adjustable body post height locations
• Plastic tub main chassis
• POM-filled injection-molded pivot balls
• Oilite bushings

Specifications

Power Source: Electric
Terrain: On-Road
Body Style: Rally
Scale Size: 1:10 Scale
Assembly Level: Ready-To-Run*
Length: 458mm (18.03in)
Width: 190mm (7.48in)
Wheelbase: 259mm (10.2in)
Weight: varies
Internal Gear Ratio: 2.6
Drive: 4WD

* This vehicle is fully assembled and ready to run right out of the box. Some models may require a battery and/or charger.

Required To Complete

• Four (4) AA batteries used in the transmitter
• LiPo Shorty battery with High Current T-Plug (AS758 Reedy 7.4V 2S LiPo Battery with T-plug)
• Charger for battery used

Team Associated's all-new A550 Rally Car is a highly detailed and fun-to-drive Ready-to-Run RC car. Built on a budget friendly Apex2 Sport chassis, the A550 Rally Car is a beautiful true-to-life scale version of the Group B cars from the golden era of rallying during the 1980s. These cars were some of the fastest, most powerful, and most sophisticated rally cars ever built!

The Apex2 Sport chassis features some of the latest features in rally racing. A front and rear independent suspension with coil-over shocks and active rear toe give the Apex2 Sport the ultimate in handling on uneven tarmac. This makes it a perfect platform for the A550 Rally Car!

Features

• For better handling, A-arm front and rear independent suspension keeps the Apex2 chassis under control during the wildest of driving conditions.
• Coil-over shock absorbers smooth out the bumps when ripping around the rally course.
• Active rear suspension allows the amount of toe change to be adjusted throughout the suspension cycle, increasing or decreasing rear grip.
• A sealed center driveline keeps dirt and debris out for smooth and reliable power delivery.
• The Reedy's 550 15-turn, 3-slot motor provides plenty of torque and tire-ripping speed.
• Controlling speed and power is by the Reedy SC500X programmable brushed ESC (program card sold separately) with T-plug connector.
• 550-sized brushed motor
• Programmable ESC (program card sold separately)
• Steel dog bones and drive axles
• Sealed front and rear gear differentials
• Adjustable hook and loop battery straps
• Injection-molded brake calipers and rotors
• Aluminum motor plate
• Adjustable shock mounting locations
• Bolt-on steering plates
• Molded one-piece tie rods and steering links
• Sealed receiver box
• Adjustable body post height locations
• Steel 25T servo horn
• Active rear toe suspension design
• Plastic tub main chassis
• 'Shorty' battery box
• POM-filled injection molded pivot balls
• Oilite bushings

What is rally racing?

Traditionally considered a gentleman's sport, rally racing can trace its origins back to the 1894 Paris-Rouen Horseless Carriage Competition. Ever since those early days, rally racing continues to be a motorsport where a driver and navigator race down closed dirt or paved roads, one car at a time, flat out as fast as they can. The drivers race only against the clock rather than each other. Ever since the beginning, rally drivers push themselves to be the fastest. They have evolved to be considered some of the best drivers in the world as they drive on pavement, gravel, mud, snow, and ice -- in all seasons and conditions.

The term "rally" was first used at the 1907 Monte Carlo Rally and wasn't widely used until it became popular in the late 1920s. Throughout the years rally racing would become popular throughout Europe and eventually the world. In 1973 the World Rally Championship was created. During the 1980s the popular rear-wheel-drive (Group 2 and Group 4) cars were replaced by more powerful four-wheel-drive (Group B) cars. It is this class that the Team Associated Apex2 Sport, A550 Rally Car is modeled after.

The Team Associated A550 Rally Car features a one-piece four color polycarbonate body with highly detailed decal sheet, injection-molded mirrors, windshield wipers, light pods, spoiler, headlights, and exhaust. The rally look is completed with a set of rally-inspired block tires and white turbine-style 1.9" (41mm) wheels.

Specifications

Power Source: Electric
Terrain: On-Road
Body Style: Rally
Scale Size: 1:10 Scale
Assembly Level: Ready-To-Run*
Length: 458mm (18.03in)
Width: 200mm (7.87in)
Wheelbase: 259mm (10.2in)
Weight: varies
Internal Gear Ratio: 2.6:1
Drive: 4WD

* This vehicle is fully assembled and ready to run right out of the box but does require a battery and/or charger.

Required To Complete

• Four (4) AA batteries used in the transmitter.
• Battery
• Charger for battery used (AS27201 or AS27203 Reedy balance Charger for LiPo, LiFe)

Team Associated is excited to bring you the Japanese classic Datsun 240Z in radio-controlled form. Built on a budget friendly Apex2 Sport chassis, the Team Associated Datsun 240Z is a beautiful true-to-life scale version of the full-size counterpart!

The Apex2 Sport chassis features some of the latest features in on road racing. A front and rear independent suspension with oil-damped shocks and active rear toe give the Apex2 Sport the ultimate in handling on uneven tarmac. This makes it a perfect platform for the Datsun 240Z!

Please Note: Nissan Motor Co., Ltd. Trademarks, designs, copyrights and/or other intellectual property rights are under license.

Features

• For better handling, A-arm front and rear independent suspension keeps the Apex2 chassis under control during the wildest of driving conditions.
• Plastic body shock absorbers smooth out the bumps when cruising around the streets.
• Active rear suspension allows the amount of toe change to be adjusted through the suspension cycle, increasing or decreasing rear grip.
• A sealed center driveline keeps dirt and debris out for smooth and reliable power delivery.
• The Reedy 550 15-turn 3-slot motor provides plenty of torque and tire ripping speed.
• Reedy SC500X programmable brushed ESC (program card sold separately) and Reedy Sport 55015-turn 3-slot brushed motor.

More Features

• 550-sized brushed motor
• Programmable ESC (with aftermarket program card)
• Sealed receiver box
• Steel 25T servo horn
• Adjustable hook and loop battery straps
• Steel dog bones and drive axles
• Sealed front and rear gear differentials
• Injection-molded brake calipers and rotors
• Aluminum motor plate
• Adjustable shock mounting locations
• Bolt-on steering plates
• Molded one-piece tire rods and steering links
• Adjustable body post height locations
• Active rear toe suspension design
• Plastic tub main chassis
• Shorty battery box
• POM-filled injection molded pivot balls
• Oilite bushings

Specifications

Power Source: Electric
Terrain: On-Road
Body Style: Touring Car
Scale Size: 1:10 Scale
Assembly Level: Ready-To-Run*
Length: 458mm (18.03in)
Width: 200mm (7.87in)
Wheelbase: 259mm (10.2in)
Weight: varies
Internal Gear Ratio: varies
Drive: 4WD

* This vehicle is fully assembled and ready to run right out of the box but does require a battery and/or charger.

Required To Complete

• Four AA batteries used in the transmitter.
• Battery
• Charger for battery used (AS27201 or AS27203 Reedy balance Charger for LiPo, LiFe).

Team Associated is excited to partner with Hoonigan ® to bring you their world-famous Hoonicorn in radio-controlled form. Built on the new Apex2 chassis, the Team Associated HooniganR Hoonicorn is a tire-slaying beast!

The engineers at Team Associated spent countless hours capturing many of the details synonymous with the 1965 Ford Mustang Hoonigan Hoonicorn. Features including officially licensed American Racing VF503 Wheels, rear diffuser, molded intake and turbos, scale brake rotors, and more!

The Hoonigan Hoonicorn Apex2 chassis is equipped with the latest features for on road racing. A front and rear independent suspension with threaded, oil-filled shocks and active rear toe give the Apex2 the ultimate in handling on an uneven tarmac. This makes it a perfect platform for the Hoonicorn and tire-shredding action!

Hoonigan ®

A person who operates a motor vehicle in an aggressive and unorthodox manner, consisting of, but not limited to, drifting, burnouts, doughnuts, as well as acts of automotive aeronautics. One who hoons.

The 1965 Ford Mustang Hoonicorn RTR V2 (HvW2 spec) builds upon where the original Hoonicorn left off. Taking the car that starred in Gymkhana SEVEN, the team modified the 410 cubic inch Roush Yates Ford V8 heart of the Hoonicorn to now feature a custom twin turbo setup from Garrett that feeds the boost through a custom Sitzer Dynamics intake manifold. The end result? 1,400 horsepower that's fed through the Sadev all-wheel-drive system with paddle shifters. The whole package sits on a set of American Racing VF503 wheels with super sticky Toyo Proxes R888R tires. Designed from the start to take a car that was already crazy and make it absolutely insane!

Ford Motor Company Trademarks and Trade Dress used under license to Associated Electrics Inc.

HOONIGAN Trademarks and Trade Dress used under license to Associated Electrics, Inc.

Features

• For better handling, A-arm front and rear independent suspension keeps the Hoonicorn under control during the wildest of driving conditions
• Threaded, oil-filled shocks smooth out the bumps when ripping down the tarmac and shredding tires.
• Active rear suspension allows the amount of toe change to be adjusted through the suspension cycle, increasing, or decreasing rear grip.
• A sealed center driveline keeps dirt and debris out along with bits of tire rubber for smooth and reliable power delivery.
• The Apex2 chassis is equipped with metal ring and pinion gears for long-lasting durability that can handle tire-slaying burn-outs.
• 2.5mm thick G10 chassis ensures that the Hoonicorn continues to "Kill All Tires" regardless of what road debris you may encounter.
• Apex2 with licensed 1965 Ford Mustang Hoonigan Hoonicorn and officially licensed American Racing VF503 Wheels
• Injection molded brake calipers and rotors
• 2.4GHz 2-channel radio system
• Reedy brushed speed control and 3-pole brushed motor
• Water-resistant, enclosed receiver box
• Steel dog bones and drive axles
• Sealed front and rear gear differentials
• Adjustable hook and loop battery straps
• Full metal ball bearings
• Aluminum motor plate
• Adjustable shock mounting locations
• Bleeder screws included on shock caps
• Bolt-on steering plates
• Molded one-piece tie rods and steering links
• Adjustable body post height locations
• Steel 25T servo horn
• 2.5mm thick G-10 chassis for increased durability and performance and G10 shock towers
• "Shorty" battery box
• POM-filled injection molded pivot balls

Specifications

Power Source: Electric
Terrain: On-Road
Body Style: Truck
Scale Size: 1:10 Scale
Assembly Level: Ready-To-Run*
Length: 458mm (18.03in)
Width: 200mm (7.87in)
Wheelbase: 259mm (10.2in)
Weight: varies
Internal Gear Ratio: varies
Drive: 4WD

* This vehicle is fully assembled and ready to run right out of the box. Model requires a battery and/or charger.

Required To Complete

• Four (4) AA batteries used in the transmitter
• LiPo Shorty battery with High Current T-Plug
• Charger for battery used

Fits

• SC28
• SC28 General Tire

Fits

• DR28
• DR28 Lucas Oil

Team Associated's Pro4 SC10 is a Ready-To-Run RC electric short course truck. The Pro4 SC10 is both all show and all go! Features include the mighty Sport 550 Reedy Power motor, 3300mAh 2S WolfPack LiPo battery, a water-resistant enclosed receiver box, adjustable oil-filled coil-over shock absorbers, and four-wheel independent suspension. The gearbox includes heavy duty three sealed gear differentials. The short course proudly rolls and jumps on Fifteen52 Turbomac HD wheels wrapped in realistic off road General Tire GTR GrabberTM all-terrain tires.

The 2.4GHz 2-channel radio system includes an adjustable digital gyro, which allows vehicle stability to be adjusted to match the terrain. A digital, high-torque Reedy servo round out the Pro4 SC10 as a potent short course contender!

Features

• Full metal center drivetrain, diff gears, diff ring, pinion gears and center driveshaft
• High-Torque Digital Servo with spring-style servo saver
• 2.4GHz 2-channel radio system
• 3300mAh 7.4 2S Wolfpack LiPo and LiPo charger
• Three sealed gear differentials
• Fifteen52 Turbomac HD wheels
• Threaded, oil-filled coil-over shock absorbers
• 4mm heavy duty adjustable steel turnbuckles
• Durable slider-type drive shafts
• Factory-finished Contender short course body
• High-grip General Tire GT(R) Grabber(TM) all-terrain tires
• Four-wheel independent suspension
• Durable, impact-absorbing front and rear bumpers

Specifications

Power Source: Electric
Terrain: Off-Road
Body Style: Truck
Scale Size: 1:10 Scale
Assembly Level: Ready-To-Run*
Length: 565mm (22.24in)
Width: 292mm (11.5in)
Wheelbase: 329mm (12.95in)
Drive: 4WD

* This vehicle is fully assembled and ready to run right out of the box. Some models may require a battery and/or charger.

Required To Complete

• Four (4) AA batteries

Team Associated's Pro4 SC10 General Tire(R) is a Ready-To-Run RC electric short course truck. It features some major components not normally found in RTRs, including the water-resistant, high-power Reedy brushless speed control, Reedy 3300kV brushless motor, a water-resistant enclosed receiver box, 2.4GHz radio system, adjustable, fluid-filled, coil-over shock absorbers, and four-wheel independent suspension. Three sealed fluid-filled differentials help balance power distribution to all four tires. The Pro4 SC10 proudly rolls and jumps on Fifteen52TM Turbomac HD wheels wrapped in realistic off road General Tire GT(R) GrabberTM all-terrain tires.

With over 100 years' experience and prowess, General Tire GT(R) has been manufacturing quality products and continues to perfect its process. They are a proud supporter of the Automobile Racing Club of America (ARCA). With General Tire GT(R) and Team Associated's combined knowledge and experience, this makes the Pro4 SC10 a potent short course winning machine!

Please Note: General Tire GT(R) and GrabberTM are trademarks of CONTINENTAL TIRE NORTH AMERICA, INC. CORPORATION

Features

• Factory-finished Contender short course body with General Tire livery
• High-grip General Tire GT(R) Grabber(TM) all-terrain tires
• Fifteen52(TM) Turbomac HD wheels
• 2.4GHz 2-channel radio system
• High-torque digital servo with spring-style servo saver
• Powerful Reedy 3300kV brushless motor
• Water-resistant high-power Reedy brushless speed control with T-plug connector and LiPo low-voltage cutoff
• Three sealed gear differentials
• Threaded, fluid-filled, coil-over shock absorbers
• Steel center drive shaft
• Durable slider type drive shafts
• 4mm heavy-duty adjustable alloy steel turnbuckles
• Four-wheel independent suspension
• Durable, impact-absorbing front and rear bumpers with LEDs

Specifications

Power Source: Electric
Terrain: Off-Road
Body Style: Truck
Scale Size: 1:10 Scale
Length: 565mm (22.24in)
Width: 292mm (11.5in)
Wheelbase: 329mm (12.95in)
Internal Gear Ratio: 2.6:1
Drive: 2WD

Required To Complete

• Four (4) AA batteries used in the transmitter.
• NiMH or LiPo battery with High Current T-Plug.
• Charger for battery used.

Team Associated's Pro4 SC10 is a Ready-To-Run RC electric short-course truck---all show and all go! It features some major upgrades not normally found in RTRs, including a water-resistant high-power Reedy brushless speed control, Reedy 3300kV brushless motor, water-resistant enclosed receiver box, adjustable oil-filled coil-over shock absorbers, and four-wheel independent suspension. Drivetrain features three heavy-duty sealed gear differentials. The short course proudly rolls and jumps on Fifteen52 Turbomac HD wheels wrapped in realistic off-road General Tire GT® Grabber™ all-terrain tires.

The 2.4GHz 2-channel radio system and a digital high-torque Reedy servo round out the Pro4 SC10 as a potent short-course contender!

Features

• 2.4GHz 2-channel radio system
• High-torque digital servo with spring-style servo saver
• Powerful Reedy 3300kV brushless motor
• Water-resistant high-power Reedy brushless speed control with T-plug connector and LiPo low-voltage cutoff
• Three sealed gear differentials
• Factory-finished Contender short-course body
• Durable, impact-absorbing front and rear bumpers with LEDs
• Fifteen52 Turbomac HD wheels
• High-grip General Tire GT® Grabber™ all-terrain tires
• Threaded, oil-filled coil-over shock absorbers
• 4mm heavy-duty adjustable alloy steel turnbuckles
• Durable slider type drive shafts
• Steel center driveshaft
• Four-wheel independent suspension

Specifications

Scale: 1:10
Power: Electric
Length: 565.15mm (22.25”)
Width: 292.1mm (11.5”)
Weight: 1850g (4.10lb)
Wheelbase: 329.0mm (12.96”)
Transmission Ratio: 2.85:1

Required To Complete

• 6-cell NiMH or 2-3S LiPo battery with High Current T-Plug
• Charger for battery used
• Four (4) AA batteries

Team Associated is proud to bring you the latest version in the Monster Truck lineup. The RIVAL MT10 is a powerful, purposeful, and built-to-last 1:10 scale monster truck capable of running on 3S LiPo battery. Its strength lies at the very core of this beast with its high-performance 3300kv Reedy brushless motor, fully sealed transmission, robust shaft drive, and center differential. Power is something you will never lack. We've got you covered with the cool factor as well, with the all-new body color scheme and shell redesign.

The RIVAL MT10 features a long-travel independent suspension that is managed by four fluid-filled, adjustable coil-over shocks, giving the RIVAL MT10 the ability to roll over just about anything in its path. Giant aggressive monster truck tires provide maximum traction, letting the RIVAL MT10 claw through the toughest terrain with ease. The 4WD drivetrain includes three sealed gear differentials that transfer the power through durable slider type drive shafts to both ends of the truck.

Whether you're smokin' tires on the asphalt, rippin' through the lawn or tearin' up a dirt field, Team Associated has you covered with the RIVAL MT10!

Features

• 2.4GHz 2-channel radio system
• High-Torque Digital Servo with spring-style servo saver
• Powerful Reedy 3300kV brushless motor
• Water-resistant high-power Reedy brushless speed control with T-plug connector and LiPo low-voltage cutoff
• Reedy 2S 7.4V 3000mAh Wolfpack
• Reedy Compact 2-4S LiPo/LiFe Ballance Charger
• New! Factory-finished RIVAL monster truck-inspired style body
• Three sealed gear differentials
• 12mm hex wheels inspired by Method Race Wheels
• High-traction all terrain tires
• Four-wheel independent suspension
• Threaded, oil-filled, coil over shock absorbers
• 4mm heavy-duty adjustable steel turnbuckles
• Durable slider-type drive shafts
• Steel center drive shaft
• Rugged adjustable wheelie bar with LEDs
• Durable, impact-absorbing front bumper with LEDs

Specifications

Power Source: Electric
Battery: LiPo 2S
Terrain: Off-Road
Body Style: Monster Truck
Scale Size: 1:10 Scale
Assembly Level: Ready-To-Run*
Length: 507mm (19.96in)
Width: 325mm (12.8in)
Wheelbase: 285mm (11.22in)
Weight: 2800g (6.17lbs)
Internal Gear Ratio: 2.85:1
Drive: 4WD

Required To Complete

• Four (4) AA batteries