1/10 Car Kits

Sporty Evolution of the TT-02!
This sporty evolution of the TT-02 chassis sees the efficient shaft-driven 4WD unit given newly-designed parts and gives users the ability to make setup adjustments across the board, making it great for racing! It is equipped with long reversible suspension arms, and rigid metal suspension mounts. The rear is set up with 3°of toe-in. CVA oil dampers are attached to specially-designed 3.0mm thick FRP damper stays, with optimum damper angle and rebound stroke providing excellent road holding. Turnbuckle upper arms and steering linkage allow fuss-free adjustment of camber and front toe. Power loss is minimized by the use of full ball bearings and metal cup joints and drive shafts.

Featured Components
_Reversible Suspension Arms _CVA Oil Shocks _FRP Front & Rear Damper Stays (newly-designed) _Metal Suspension Mounts (w/3°rear toe-in) _Metal Wheel Axles, Gearbox Joints & Drive Shafts _Full Ball Bearings _Turnbuckle Upper Arms & Steering Linkage _Die-Cast Metal Hex Wheel Hubs

• 3mm thick Front/Rear FRP Damper Stays (NEW part)
• Metal Suspension Mounts (NEW part)
• Item 51297 Reversible Suspension Arms (Long)
• CVA Oil Shocks
• Turnbuckle Shaft Front/Rear Upper Arms
• Turnbuckle Shaft Steering Tie-Rods
• Type 540 Torque Tuned Motor
• Item 51023 Medium-Narrow Racing Radial Tires
• Metal Cup Joints Metal Drive Shafts
• Die Cast Aluminum Hex Wheel Hubs

• Length: 457mm, Width: 204mm, Height: 136mm
• Wheelbase: 251mm
• Tyre Width/Diameter: 27/67mm (Front), 32/67mm (Rear) 
• Bathtub-type Frame 
• Shaft Driven 4WD
• Front/Rear 4-Bevel Resin Differentials
• 3-Piece Steering Tie-Rod
• 4-Wheel Double Wishbone Suspension
• Front/Rear Friction Dampers
• Gear Ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately sold pinion) 
• Type 540 Motor

• Two-channel radio, steering servo, 7.2volt battery with compatible charger, and Tamiya PS polycarbonate paint

• Length: 407mm, Width: 186mm, Height: 159mm
• Wheelbase: 257mm　
• Tyre Width/Diameter (Front and Rear): 27/69mm
• Bathtub-type Frame
• Shaft Driven 4WD
• Front/Rear 4-Bevel Resin Differentials
• 3-Piece Steering Tie-Rod
• 4-Wheel Double Wishbone Suspension
• Front/Rear Friction Dampers
• Gear Ratio = 9.58:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinion)
• Type 540 Motor

• Two-channel radio, steering servo, 7.2volt battery with compatible charger, and Tamiya PS polycarbonate paint

• 1/10 scale R/C model assembly kit. Length: 451mm, width: 186mm, height: 134mm
• Wheelbase: 257mm
• Durable 1.0mm-thick polycarbonate body
• The model utilizes the efficient shaft-driven 4WD TT-02 chassis which features superior adaptability and stability
• 10-spoke wheels moulded in Gun Metal are paired with tread pattern racing radial tyres
• Includes stickers and window masking tape for use in the painting process
• Includes 540 brushed motor and ESC

• Two-channel radio, steering servo, 7.2-7.4volt battery with compatible charger

• 1/10 scale R/C model assembly kit. Length: 457mm, width: 204mm, height: 138mm
• Wheelbase: 251mm (short)
• The form of the Porsche 911 Carrera RSR 2.8 is realistically recreated in lightweight polycarbonate (comes pre-painted in white with windows tinted in smoke)
• Silver colour wheels (front: narrow, rear: wide / rims and red wheel caps are separate) are paired with racing slick tyres
• Separate moulded plastic part recreates the side mirror
• Includes 540 brushed motor and ESC

• Two-channel radio, steering servo, 7.2-7.4volt battery with compatible charger, and Tamiya PS polycarbonate paint