1/10 Car Kits

• This is a 1/10 scale R/C model assembly kit
• Length: 454mm, width: 189mm, height: 120mm
• Wheelbase: 251mm (short)
• The powerful form of the Mercedes-AMG GT3 EVO is captured in style by a lightweight, rigid polycarbonate body with separate polycarbonate front light cases (LED lights are not attachable), rear wing and canards 
• Separate black ABS plastic parts realistically depict side mirrors and rear wing stays
• The efficient shaft-driven 4WD TT-02 chassis features superior adaptability and stability
• Black mesh type wheels are paired with racing slick tyres
• Includes Item 53415 Touring Car Urethane Bumper Sponge to keep the body in top condition
• Comes with stickers and masking stickers for use in the paint job
• Carton quantity is 6 and EAN is 4950344587506

• Two-channel radio, steering servo, 7.2-7.4volt battery with compatible charger, and Tamiya PS polycarbonate paint

• 1/10 scale R/C model assembly kit. Length: 446mm, width: 192mm, height: 127mm 
• Wheelbase: 251mm
• The Audi 90 Quattro Racing is made of lightweight, rigid polycarbonate
• Separate red ABS plastic parts realistically depict distinctive side mirrors, a rear wing and air ducts
• Newly designed white dish wheels (+4mm offset) are paired with slick tyres
• The model utilizes the shaft-driven 4WD TT-02 chassis which features superior adaptability and stability
• Includes Item 51226 (Urethane Bumper L (TT-01, TGS)) to keep the body in top condition
• Includes: 540-size Tamiya Torque Tuned brushed motor and Hobbywing produced ESC

• Two-channel radio, steering servo, 7.2-7.4volt battery with compatible charger, and Tamiya PS polycarbonate paint

• This is a 1/10 scale R/C chassis assembly kit
• Equipped with front mid-ship, longitudinal motor position
• Changing rear section allows a choice from three wheelbases (short: 210mm, middle:225mm, long: 239mm) (ref. Image 3)
• Bathtub frame chassis and polycarbonate chassis cover plus front inside polycarbonate cover and rear section are newly-folded parts Mud guards helps prevent dirt and dust from getting inside
• New front C-hubs and rear uprights, plus lower suspension arms allow two types (about 8mm or 13mm) of ground clearances
• Caster angle can be set at 5 degrees by suspension mounts *For comparison, the XV-02 PRO chassis kit uses caster blocks which feature 6-degree caster angle (XV-01 chassis: 10-degree caster angle)
• The drivetrain employs oil-filled gear differential for front and rear
• Comes with two 39T differential gears and one 40T differential gear for adjustment of front and rear drive balance
• Use 39T gear (w/15T gear) on the front and 40T gear (w/15T gear) on the rear for drive balance bias to front and vice versa for drive balance bias to rear
• It features a longitudinal upright battery pack position in the centre-left for optimum balance
• Front bumper with skid angle contributes to reduce surface contact 
• Aluminium dampers are employed at the front and rear
• M-Chassis 11-spoke racing wheels (Item 51394) are paired with 60D rally block tires (Item 51427)
• Front and rear universal drive shafts come as standard
• Compatible with centre diff setup and separately sold slipper clutch
• Low-profile servo is recommended (Standard servo can be used, but it comes into contact with the front inside polycarbonate cover
• Please note that this chassis requires separately sold body, battery pack, motor, ESC and R/C equipment

• 1/10 scale R/C model assembly kit. Length: 468mm, width: 188mm, height: 120mm. Wheelbase: 257mm.
• Lightweight, rigid polycarbonate body with separate polycarbonate front and rear light cases (LEDs are not attachable) and canards.
• Separate black ABS plastic parts realistically depict distinctive side mirrors and a large rear wing.
• The model utilizes the shaft-driven 4WD TT-02 chassis, which features superior adaptability and stability.
• 6-spoke black wheels are paired with slick tires.
• Includes 540-bushed motor and ESC.
• Comes with livery stickers and masking window tape for use in the painting process.
• Requires: 2-channel radio, servo, 7.2-7.4volt battery & compatible battery charger, and Tamiya PS paint.

• 1/10 scale R/C model assembly kit. Length: 470mm, width: 194mm. Wheelbase: 257mm.
• 1997 Mercedes-Benz CLK-GTR is recreated in lightweight and durable polycarbonate.
• Separately moulded white ABS plastic parts recreate side mirrors and rear wing.
• Silver mesh wheels are paired with racing slick tires. (The rear wheels are wide tread.)
• TC-01 chassis
• The durable and composite monocoque-frame chassis provides shaft driven 4WD from a central motor via front and rear propeller shafts, with oil filled gear differentials.
• 4-wheel independent double wishbone suspension employs A-shaped long arms, plus inboard setups front and rear with oil dampers actuated by push rods and rocker arms.
• Use spacers and shims to easily alter camber, skid, and toe angle settings.
• Both suspension arms and uprights are identical left, right, front and rear, for more efficient pit work.
• Rear transverse battery position is also compatible with 139x47x25mm square-shaped battery packs.
• Required to complete: 2-channel radio, LOW-PROFILE steering servo, (Note: Standard Size Servos cannot be used), motor, ESC, 7.2-7.4volt battery with compatible battery charger, and Tamiya PS paint.

• This is a 1/10 scale R/C model assembly kit. Length: 450mm, width: 187mm, height: 136mm. Wheelbase: 257mm. 
• The lightweight, durable 1.0mm-thick polycarbonate body authentically captures the Toyota Celica GT-Four RC (ST185) in style.
• The model utilizes the efficient shaft-driven 4WD TT-02 chassis which features superior adaptability and stability. 
• 5-spoke wheels are paired with tread pattern racing radial tires. 
• Comes with stickers and masking stickers for use in the paint job
• Torque Tuned Motor & ESC included

• 1/10 scale R/C model assembly kit. Length: 427mm, width: 185mm, height: 145mm. Wheelbase: 257mm.
• Lightweight, durable 1.0mm-thick polycarbonate body.
• Separate plastic parts realistically depict side mirrors and rear wing element.
• Efficient shaft-driven 4WD TT-02 chassis features superior adaptability and stability.
• White 16-spoke wheels are paired with tread pattern racing radial tires.
• Comes with window masking stickers for use in the painting process.
• Includes 540 Torque Tuned Motor.
• Includes ESC.
• Requires 2-channel radio, steering servo, 7.2-7.4volt battery with compatible charger and Tamiya PS paints to complete.

• 1/10 scale R/C model assembly kit. Length: 397mm, width: 170mm, height: 142mm. Wheelbase: 239mm (L-size wheelbase spec). Lightweight polycarbonate body.
• Separately moulded plastic components recreate light cases, bumper, and side mirrors.
• The MF-01X chassis is at home on-road or on flat dirt, thanks to 4-wheel double wishbone suspension.
• Polycarbonate light cases are compatible with separately sold 5mm LEDs.
• Stickers are included to recreate body details.
• A host of Hop-Up Option parts are available to tune the MF-01X chassis.
• Includes 540 Torque Tuned motor and ESC.
• Requires 2-channel radio, steering servo, 7.2volt battery with compatible charger and Tamiya PS paint to complete.

• 1/10 scale R/C model assembly kit. Length: 395mm, width: 168mm, height: 121mm. Wheelbase: 210mm
• 1.0mm thick polycarbonate body
• Separate ABS plastic parts authentically depict headlights, front/rear bumpers and side mirrors
• The model is based upon the rear-wheel drive M-06 chassis (210mm wheelbase setup) featuring a rear-mounted motor
• Dish wheels moulded in silver are paired with 60D radial tires (Item 50683) at front and 60D super radial tires (Item 54999) at rear
• Stickers are included to recreate sponsor logos, race numbers and more.
• Window Masking stickers included to help aid the painting process of the body
• Type 540 motor and ESC included

• Two-channel radio, steering servo, 7.2volt battery with compatible charger, and Tamiya PS polycarbonate paint

This R/C assembly kit recreates the Opel Calibra V6 Cliff. The polycarbonate body is mounted on the TT-01 Type-E chassis, for ease of assembly. The Opel Calibra V6 Cliff was previously released on the Tamiya TA-02 chassis during the 1990’s touring car boom.

About the Opel Calibra V6 Cliff
The Opel Calibra V6 Cliff took part in the 1995 running of the Deutsche Tourenwagen Meisterschaft (DTM) series. Entered by Joest Racing with the driver JJ. Lehto, the car was powered by a 2.5-liter V6 engine capable of 420 hp. The distinctive black body with the Cliff logo caught people’s eye, and this car showed off race pace strength in DTM races.

• 1/10 scale R/C model assembly kit. Length: 448mm, width: 185mm, height: 128mm. Wheelbase: 257mm.
• Lightweight, rigid polycarbonate body (clear) with separate side mirrors and a rear wing.
• The model utilizes the shaft-driven 4WD TT-01 Type-E chassis, which is based around a durable bathtub frame and gives an intuitive, highly controllable driving experience.
• Features 4-wheel double wishbone suspension system.
• Silver ABS, dish wheels are paired with racing slick tires.
• Comes with stickers and window masking stickers for use in the paint job process.
• Includes Tamiya Torque-Tuned 540-brushed motor.
• Requires: 2-channel radio, steering servo, 7.2-7.4volt battery with compatible charger, and Tamiya PS paint.

Speedy and controllable 2 belt-driven 4WD chassis in TA series!
The Tamiya TA series continues to evolve. This iteration, the TA08 PRO, further evolves on-road touring car driving with this hopped-up chassis. The slim TA08 PRO Chassis Kit eliminates the need for an upper deck, which balances weight and rigidity. Its layout features the motor in near identical position to the TRF420, with the spur gear in front of the motor. Newly designed upper & lower arms make effective use of tire grip, equipped with laid down SSBB (Super Short Big Bore) dampers. This kit was based on Tamiya's extensive know-how built up through our traditional chassis series and data from racing, and offers plenty of potential for tuning.

• 1/10 scale R/C touring car assembly chassis kit.
• Features Stepped-V shaped main chassis which balances weight and rigidity.
• The battery pack and servo are positioned on a slight angle (about 10 degrees) to reduce surface contact while cornering and facilitate optimum weight distribution.
• Spur gear is positioned in front of motor which produces stable drivability.
• 2 belt-driven 4WD uses TRF420 oil-filled gear differentials and steel TA07 differential joint cups.
• A-arm suspension arm gives your model a low center of gravity, enhanced with laid down dampers.
• Camber and caster angles are adjustable by turnbuckle shafts and lower arm spacers respectively.
• Comes with Super Short Big Bore size shock dampers.
• Universal drive shafts and full bearings included.
• Rotating body mounts by 180 degrees switches between standard and 2mm advanced body positions. This feature allows the user to change the balance of the car with any selected body.
• Requires: 2-channel radio, short steering servo, ESC, motor, 190mm touring car body set, tires, 7.2-7.4 volt battery pack & compatible charger.

This TAMIYA R/C model assembly kit depicts the 1st-generation (T1) variant of the Volkswagen Type 2 van, which was introduced in 1950 and also known as the Volkswagen Bus to many of its legions of fans. Production of the actual van continued through until 1967. The iconic body is paired with the rear-wheel drive M-06 chassis for realistic fun driving just like the real RR Type 2 T1.

M-06 Chassis
The M-06 chassis features a Rear-Mounted Motor, Rear-Drive setup and features a longitudinally-mounted battery pack, with R/C radio gear positioned on either side for optimum balance and low center of gravity. 4-wheel double wishbone suspension is equipped with 60D radial tires at the front and 60D super grip tires at the rear. In addition, a 3-piece steering linkage offers nimble handling response.

• 1/10 scale R/C model assembly kit.
• Polycarbonate body with separate molded plastic parts included to create bumper, light cases and side mirrors.
• The M-06 chassis features a rear-motor, RWD setup with a longitudinally-mounted battery pack and R/C radio gear positioned on either side for optimum balance and a low center of gravity.
• 239mm wheelbase M-06L chassis.
• Metal-plated dish type wheels.
• Includes 540 motor.
• Includes Tamiya TBLE-02S ESC (electronic speed control) Capable of running sensor brushless motors and brushed motors alike. (21.5 Turn BL motor limit) (23 Turn brushed motor limit)
• Requires: 2-channel radio, steering servo, 7.2-volt battery pack & charger, and Tamiya PS paint.

• 1/10 scale R/C model assembly kit. Length: 445mm, width: 184mm
• Body is made of durable polycarbonate, with separate moulded mirror, wing and grille parts, as well as a plated Mercedes-Benz 3-pointed star emblem
• Marking stickers included to recreate sponsor logos and numbers on the No.20 car
• 6-spoke wheels are moulded in soft green and paired with slick tyres
• The TT-01 Type-E chassis features shaft-driven 4WD system and full independent suspension that offers easy handling and great customisability

• R/C equipment (transmitter, servo), battery pack and charger to complete and Tamiya PS spray paint.

Designed for a 24-hour endurance race on the grueling Nurburgring, the WRX STI NBR Challenge car took Subaru's high-performance WRX STI sport sedan as a base. It certainly did the business, winning its class in the 2016 running of the race, and this R/C model assembly kit recreates that car. Its complex lines are gracefully depicted by a polycarbonate body, capturing features such as the bonnet air intake and vents, plus the sharp front fenders and diffuser-shaped rear end. Side mirrors and rear wing are depicted using separate parts, while stickers are included to recreate the multitude of sponsor logos.

TT-02: Adaptable, balanced shaft driven 4WD
The shaft-driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to give excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports. Gun metal color mesh wheels are paired with slick tires for a racy finish.

• 1/10 scale R/C model assembly kit.
• The aerodynamically-optimized form of the race version of the WRX STI is accurately rendered in lightweight and durable polycarbonate.
• Separately molded parts are included in the kit to recreate side mirrors and rear wing.
• The beginner-friendly yet highly adaptable TT-02 is a versatile and easy-to-maintain chassis.
• Gun metal color mesh type wheels are paired with slick tires.
• Stickers are included to recreate the markings of the car, as are masking stickers for use when painting.
• Includes 540-type brushed Torque-Tuned motor.
• Includes the Tamiya TBLE-02S ESC (brushless motor and brushed motor compatible)
• Requires 2-channel radio, 7.2volt battery, and compatible charger, and PS paint to complete.
• An extensive TT-02 option parts line-up offers a number of opportunities to tune your car.

• Length: 453mm, Width: 189mm, Height: 119mm
• Wheelbase: 257mm
• Tyre Width/Diameter: 27/67mm (Front & Rear)
• Bathtub-type Frame
• Shaft-Driven 4WD
• Front/Rear 4-Bevel Resin Differentials
• 3-Piece Steering Tie-Rod
• 4-Wheel Double Wishbone Suspension
• Front/Rear Friction Dampers
• Gear Ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions)
• Type 540 Motor
• Electronic Speed Controller (ESC) included

• Two-channel radio, steering servo, 7.2-7.4volt battery with compatible charger, and Tamiya PS polycarbonate paint

• 1/10 scale R/C model assembly kit. Length: 445mm, width: 184mm
• The 190 E form is expertly depicted in durable polycarbonate, with separate moulded mirror, wing and grille parts, as well as a plated Mercedes-Benz 3-star emblem
• Marking stickers are included to recreate the numerous sponsor logos, car numbers, etc
• 6 spoke wheels (same design as Celica GT-Four '97 Monte-Carlo - Item 50770) are moulded in gold, and paired with slick tyres
• The TT-01 Type-E chassis features shaft-driven 4WD system which offers easy handling
• A wide range of option parts is available to tune the TT-01 Type-E chassis
• Torque-tuned motor is included

• Two-channel radio, steering servo, 7.2volt battery with compatible charger, and Tamiya PS polycarbonate paint

• Length: 347mm, Width: 170mm, Height: 215mm
• Wheelbase: 225mm (M)
• Tyre Width/Diameter (Front & Rear): 27/69mm
• Tread (Front & Rear): 138mm
• Monocoque Frame
• Shaft-Driven 4WD
• 3-Bevel Differential Gears
• 2-Piece Steering Tie-Rod
• 4-Wheel Double Wishbone Suspension
• Front & Rear Friction Dampers
• Gear Ratio = 9.5:1
• Type 540 Motor

• Two-channel radio, electronic speed controller (ESC), steering servo, 7.2volt battery with compatible charger, and Tamiya PS polycarbonate paint

• Length: 407mm, Width: 186mm, Height: 155mm
• Wheelbase: 257mm
• Tyre Width/Diameter: Front & Rear 27/69mm
• Monocoque Chassis Frame
• Belt-Driven 4WD
• F/R Gear Differential Units
• 3-Piece Steering Tie-Rod
• 4-Wheel Double Wishbone Suspension
• CVA Shock Units
• Gear Ratio 8.04:1 (When used with kit-standard 68T spur and 22T pinion gears)
• Full Ball Bearings
• Type 540 Motor
• Requires 2-channel radio, servo, electronic speed controller, and Tamiya PS spray paint (sold separately)

• Specifications: Length: 434mm, Width: 188mm, Height: 150mm
• Wheelbase: 257mm
• Monocoque Chassis Frame
• Belt-Driven 4WD
• F/R Gear Differentials
• 3-Piece Steering Tie-Rod
• 4-Wheel Double Wishbone Suspension
• CVA Shock Units
• Gear Ratio＝8.04:1 (When used with kit-standard 68T spur and 22T pinion gears)
• Full Ball Bearings
• Type 540 Motor
• Requires an electronic speed controller (sold separately)
• Separately Required Items
  • 2-channel R/C system with ESC　
  • R6/AA/UM3 batteries for transmitter
  • Battery Pack & Charger

• This is a 1/10 scale R/C model assembly kit. Length: 452mm, width: 188mm, height: 132mm. Wheelbase: 257mm (standard)
• The kit features existing body, updated markings, masking stickers, instruction manual and packaging
• The form of the BMW M3 GT2 2009 is captured in style
• The bathtub frame of the evolved shaft-driven 4WD TT-01 Type-E has its motor and battery close to the ground for lower centre of gravity and optimum balance
• Silver mesh type wheels are paired with racing slick tyres
• Carton quantity is 6 and EAN is 4950344584499

• What's included?
  • ESC 
  • Torque-Tuned motor
  • LEDs
• What's needed?
  • Transmitter & receiver
  • Servo
  • Battery and charger
  • Paint for the polycarbonate body
  • Tools to help with assembly of the kit

• This is a 1/10 scale R/C model assembly kit. Length: 488mm, width: 205mm, height: 124mm. Wheelbase: 251mm
• The kit features an existing body and new stickers
• The distinctive form of the 1978 Ford Zakspeed Capri Turbo is captured in style by a lightweight, rigid 1.0mm thick polycarbonate body
• The efficient shaft-driven 4WD TT-02 chassis features superior adaptability and stability
• Front 2-piece mesh wheels from Item 50548 (silver colour) are paired with racing slick tyres
• Rear 2-piece wide mesh wheels from Item 50549 (silver colour) are paired with wide racing slick tyres from Item 50547
• Gold colour wheel caps are used at front and rear
• Comes with stickers and masking stickers for use in the paint job
• Carton quantity is 6 and EAN is 4950344475261

• What's included?
  • ESC 
  • Torque-Tuned motor
• What's needed?
  • Transmitter & receiver
  • Servo
  • Battery and charger
  • Paint for the polycarbonate body
  • Tools to help with assembly of the kit

• Carbon fibre battery holder (dedicated component)
• Rear stabilizer
• TRF special dampers (hard black coating)
• Double-cardan drive shafts (33mm)
• High-traction lower deck
• Reinforced C parts (uprights)
• Reinforced D parts (suspension arms)
• 3x106mm aluminium turnbuckle shafts
• Aluminium joint cups
• Clamp-type aluminium wheel hubs (5mm)
• 2.6mm diameter titanium-coated shafts
• 46mm titanium-coated shafts
• 06 module aluminium pinion gear (20T)
• Full ball bearings
• Hi-torque servo saver (black)

• Scale is 1:10
• Length: 332mm (including bumper)
• Width: 164mm
• Wheelbase: 225mm or 239mm (Selectable)
• Monocoque Frame
• Front-Midship Motor, Front-Wheel Drive
• Oil-Filled Gear Differential
• 3-Piece Steering Tie-Rod
• 4-Wheel Independent Double Wishbone Suspension
• TRF Special Dampers
• Gear Ratio = 5.78:1 using included 20T pinion gear (7.22:1 - 4.81:1 available with separately sold pinion gears)
• Requires an Electronic Speed Controller (sold separately)

• Compatible body
• 2-Channel R/C System w/ESC
• R6/AA/UM3 batteries for transmitter
• Type 540 Motor
• Battery Pack & Charger

• This is a 1/10 scale R/C model assembly kit. Length: 454mm, width: 189mm, height: 120mm. Wheelbase: 251mm (short)
• The powerful form of the Mercedes-AMG GT3 EVO is captured in style by a lightweight, rigid polycarbonate body with separate polycarbonate light cases (LED lights are not attachable), rear wing and canards
• Separate black ABS plastic parts realistically depict side mirrors and rear wing stays
• The efficient shaft-driven 4WD TT-02 chassis features superior adaptability and stability
• Black mesh type wheels are paired with racing slick tyres
• Includes Item 53415 Touring Car Urethane Bumper Sponge to keep the body in top condition
• Carton quantity is 6 and EAN is 4950344475193

• What's included?
  • ESC 
  • Torque-Tuned motor
  • Polycarbonate body pre-painted with the following colours:
  • Metallic Orange (PS-61)
  • Black (PS-5)
  • Smoke (PS-31) windows
• What's needed?
  • Transmitter & receiver
  • Servo
  • Battery and charger
  • Tools to help with assembly of the kit

• 1/10 scale R/C model assembly kit. Length: 466mm, width: 188mm, height: 125mm. Wheelbase: 257mm.
• Polycarbonate body with separate polycarbonate front light cases for a 3D effect and canards. (NOTE: LEDs lights are not attachable)
• Separate black ABS plastic parts realistically depict distinctive side mirrors and a rear wing.
• The model utilises the shaft-driven 4WD TT-02 chassis which features superior adaptability and stability.
• 12-spoke gun metal wheels are paired with slick tires.
• Includes Item 51007 (Urethane Bumper M (TT-01/TGS)) to keep the body in top condition.
• Includes ESC and 540-Type brushed motor.
• Required to complete: 2-channel radio, steering servo, 7.2 volt battery with compatible charger, and Tamiya PS paints.

• 1/10 scale R/C model assembly kit. Length: 404mm, width: 187mm, height: 155mm 
• Wheelbase: 257mm (standard)
• BT-01 chassis is set up for the front motor, front drive configuration for this model
• The form of the Peugeot 306 Maxi is authentically recreated in lightweight polycarbonate
• 6-spoke wheels are paired with racing radial tyres
• Separate moulded plastic parts recreate side mirrors and the rear wing
• Livery markings are Tamiya original design to recreate fictitious team
• Includes 540-Type Torque Tuned brushed motor and Hobbywing produced ESC

• Two-channel radio, steering servo, 7.2-7.4volt battery with compatible charger

• 1/10 scale R/C model assembly kit. Length: 479mm, width: 188mm, height: 127mm (approximate) 
• Wheelbase: 251mm (short)
• Polycarbonate body with separate polycarbonate rear wing and light case details
• Separate plastic parts moulded in black realistically depict side mirrors and wing stays
• The model utilizes the shaft-driven 4WD TT-02 chassis which features superior adaptability and stability
• Black mesh-type wheels are paired with slick tyres
• Includes Item 51226 (Urethane Bumper L (TT-01, TGS)) to keep the body in top condition
• Includes stickers and window masking tape for use in the painting process
• Includes 540-Type Torque Tuned brushed motor and Hobbywing produced ESC

• Two-channel radio, steering servo, 7.2-7.4volt battery with compatible charger