Receivers

Only for ET111 radio

Receiver as supplied with the MX-6.
Model: RX-391W
Frequency: 2.4GHz FHSS-E
Input Voltage: 4.8v ~ 7.4v
Weight: 12.4g
Dimensions: 24.0 x 37.0 x 18.2 mm
Fail Safe Support: Yes - Throttle

ET0785

• Super strong
• Width: 25mm
• Length/roll: 10.0m

No more pulling out the antenna! With this handy bolt fit Tube Clamp. Note - Please use smaller M3 Bolt if fowling of cable is apparent.

• Item no: 2020025
• Model: R10WP
• HF-Frequency: 2.4 GHz FHSS 
• Channels: 10
• Waterproof: Yes
• Input power: 4.8–10 V/DC
• Weight: 10g
• Size: 40*27*13mm 

FLYSKY FS-i4X 6CH 2.4GHZ RECEIVER

Specifications

PWM Channels: 6
Wireless Frequency: 2.4GHz
Wireless Protocol: AFHDS 2A
Range: 500 ~ 1500m (in the air)
Antenna Type: single antenna (150mm)
Power: 4.0-6.5V
RSSI: Not supported
Data Port: PWM
Temperature Range: 0 ? — + 60 ?
Humidity Range: 20% -95%
Online Update: No
Dimensions: 45 * 23 * 9 mm
Weight: 13 g
Certification: CE

Flysky FGr4 2.4ghz Receiver

FlySky FS-FGR4 2.4Ghz 4 channel remote control receiver, compatible with FlySky Noble FS-NB4 Transmitter.

Features:

Easy to bind and very fast link-up, quick and extremely stable in performance

The receiver supports PPM/i-bus/PWM data output, suitable for AFHDS3 system remote controller. Has 4 PWM outputs (CH1-CH4) iBUs output and input for connecting additional sensors.

Specifications:

• Item Name: FS-FGR4
• Brand Name: Flysky
• Channels: 4 Channels
• 2.4GHz System: AFHDS3
• Model type: RC Car Boat
• Display: LED indicator
• Online update: YES
• Transmission power: ＜20dbm
• Modulation type: GFSK, CSS
• Date output: PPM/i-bus/PWM
• Frequency: 2.4G
• Power: 3.5-12V
• Color: Black
• Weight: 10g
• Size: 46 * 28 * 22mm

Package list:

• 1 x Flysky FS-FGR4 Receiver
• 1 x Bind Cable

Colour: Black

Position: Front

Flysky FS-A3 2.4ghz AFHDS2A Receiver

A replacement receiver for various FlySky Transmitters (See Chart)

Specs

• Product Model: FS-A3
• PWM channels: 3
• Wireless frequency: 2.4GHz
• Wireless protocol: AFHDS 2A
• Range: 500 ～ 1500m (in the air)
• Antenna type: single antenna (150mm)
• Power: 4.0-6.5V
• RSSI: Not supported
• Data port: PWM
• Temperature range: 0 ℃ — + 60 ℃
• Humidity range: 20% -95%
• Online update: No
• Dimensions: 35 * 22 * 12 mm
• Weight: 6 g
• Certification: CE

Compatible Transmitters: FS-i4, FS i6, FS-i10, FS-GT2E, FS-GT2G,

NOTE: This will work with some FS-GT3B Transmitters that use the FS-A3 Receivers. If you are currently using an FS-GR3E then this not work

Colour: Black

Position: Front

This is the all-new RC4WD Warn 1/10 Advanced Wireless Remote/Receiver Winch Controller Set. It is Officially Licensed by Warn Industries and features an On/Off switch with LED indicator, lanyard strap, and a 1:1 detailed remote design with rubber buttons for improved operation.

Specifications

Remote

• Over 50ft Range
• Batteries Included
• Total Length: 2.10in / 53.5mm
• Total Width: 1.06in / 27mm
• Height: 0.59in / 15mm
• Weight: 0.49oz / 13.9g
• On/Off Switch

Receiver

• Small Compact Size
• Operating Voltage 6V to 11.1V
• Easy Plug and Play
• Instruction Included
• Length: 1.6in / 40.4mm
• Width: 1.2in / 30.2mm
• Height: 0.37in / 9.4mm
• Weight: 0.5oz / 14g

Wires

• Length: 6.0in / 150mm
• Wires Weight: 0.14oz / 4g

Lanyard

• Total Length: 7.24in / 184mm
• Weight: 0.14oz / 1.8g

What's Included

• 1 x WARN 1/10 Wireless Remote
• 1 x Wireless Receiver Unit
• 1 x 6" Battery/Receiver Power Wire
• 1 x 6" Receiver/Winch Control Wire
• 1 x Lanyard
• 1 x Warn Decal Sheet

Notes

• This Receiver on this product is waterproof but the Controller is not. You may be able to waterproof on your own but this will void the manufactures warranty.
• Tampering with this product in any way would result in voiding the warranty.
• Binding process can take 3-5 seconds.
• Some LiPo battery voltage can be higher than 11.1 volts. Please be careful and check voltage before using your battery. Use a BEC if needing to use a 3 cell LiPo.
• The remote comes with a 3V CR2025 button cell.