1/14 Euro Truck Storage, Stands & Pitwear

Kyosho Carrying Bag Ssize (250x410x360)

The small Kyosho carrying bag is perfect for 1/10 scale cars or buggies! It features 3 sturdy plastic drawers that slide into heavy-duty riveted sleeves.

• Ultra-resistant materials
• Very chic black color
• With 3 storage drawers
• For 1/10 cars and buggies
• Exterior dimensions: 250 x 410 x 360 mm

FASTRAX TOOL CARRY BAG 1 LAYER

Keep your tools safe and in one location with this simple tool bag carrier. At just £9.99 there really is no excuse not to rescue your tools from rattling around in a draw or box. Give them some TLC, they will thank you for it.

(Tools not included)

Fastrax Compact Hauler Bag

(Note this is not the mega car hauler - its smaller - most buy the Mega Hauler designed for 1/8th car, even for 1/10 car use.

The Fastrax Compact Hauler Bag is made with endurance in mind and designed to resist the stresses of racing life. Ideal for RC vehicles up to and including 1/10th scale touring cars.

It's 5 removable cardboard storage boxes keep your stuff secure and additional storage can be found throughout the bag. Up top there’s a unique insert that is designed for storing your tools during transportation. It can also be removed when wanting to work on your vehicle.Added storage on the top, back and side of the bag are perfect for decal storage, note pads, and other items that need special attention.

The cover itself is made from a durable nylon thick enough to resist tearing and everyday use. Adorned with the Fastrax logo and colours this bag has the looks to match it's rugged strength. Heavy-duty wheels are located on the opposite side for effortless ease of towing as well.

Dimensions:

• Length: 55cm
• Width: 25cm
• Height: 50 cm

FASTRAX CAR MEGA HAULER TRANSPORTER BAG (1/8TH) (NEW 2025 DESIGN)

Fastrax's Mega Hauler pit bag gets a new design for 2025. The handy bag is made to resist wear and endure all those trips to and from the track and beyond. The cover itself is made from a durable nylon thick enough to resist tearing and everyday use. Embroidered and silk-screened logos embody the bag throughout.

Corrugated plastic storage boxes keep your stuff secure and resist tearing and warping under the most extreme conditions. Each storage box includes an injection moulded plastic handle insert and injection moulded leading edge insert for easy sliding in and out of each box. Additional storage is found throughout the bag. Up top there's a unique insert that is designed for storing your tools during transportation. It can also be removed when wanting to work on your vehicle. Added storage on the front, back and side of the bag are perfect for decal storage, note pads, and other items that need special attention.

Internal storage includes one extra-large compartment is at the top of the bag, one large compartment is located in the middle of the bag, and two medium compartments are located at the base of the bag. A retractable handle slides in-and-out for easy towing of your bag. Heavy-duty wheels are located on the opposite side for effortless ease of towing as well.

When you're looking for a pit bag to represent you and your gear in the utmost durability, form, and function, then check out the new mega hauler transporter from Fastrax.

Dimensions

Overall dimensions include side pockets.

FASTRAX MULTI-FUNCTION LED PIT LIGHT - UK 3-PIN

Features

• 180° Rotating and folding LED Head Lamp.
• LED lighting with three colour temperature choices.
• LCD Screen with Clock, Calendar, Temperature display.
• Touch Control Panel.
• Alarm Clock.
• USB Charge Output.
• Mobile Phone Bracket.
• Mobile Phone Wireless Charging.

Specifications

Input Voltage: DC12V
Weight: 475g
Charging Output: 10W Wireless
USB Charging Output: 5V = 1A
Colour Temperature: 3000K-4500K-6000K
Brightness: 5 Levels
Lumen: 420LM
Base Dimensions: 172 x 115mm
Post Dimensions: 279 x 38mm
Case: ABS Composite

• Register Box for small parts like screws...
• Measure (LxWxH) 130 x 69 x 24 mm

FOR STORAGE OF 1/10 TOUYRING CAR WHEELS. NEVER MISS THEM UP AGAIN WITH THESE HANDY STORAGE SOLUTIONS!

Random Colours****

Features:

*Strong, reinforced, waterproof plastic corrugated plastic frame version
*Convenient compact size design
*Two large drawers for 1/10 car, made from strong, reinforced, waterproof material
*Side pockets for manual, setup sheet & other purposes

*Made In Taiwan

KOS32251 Strong cardboard box frame version is also available.

*Cars, parts, accessories & others are not included.*

Please notice the bag is flexible.  Dimensions below is for your reference.
The actual size can be larger.

Size:              W × D × H - 540× 350× 420 mm (outside)

With
2PCS  KOS32012  1/10 Buggy Bag Large Drawer 470x310x180mm
W × D × H - 460× 285× 175 mm (inside)

Features:

• Quick lid opening for easy access to transmitter
• A multi-functional foam is included for thinner transmitter.  The foam can be used as sedan car stand as well.
• Integrated foam throughout to keep your gear protected
• Several pockets for all kinds of stuff, including mobile phones, key, etc.
• Good for most popular transmitters, such as Sanwa M17, Sanwa M44 series, Futaba 7PX series, Futaba 3 series, Futaba 4 series, KO, Traxxas & more.
• The bag is not only good for rc car use, but also excellent for leisure use.
• KOS13401 1/10 Touring Car Stand included.

*Transmitter and mobile phone are not included.
Made In Taiwan

MAT 850mm X 500mm

40x30cm

Measuring 19.5 x 16 x 13 cm with 4 separate compartments.

Stiff supported design to prevent the bottles getting squashed.

Easily fits 16 Core RC Shock/Diff oil bottles.

From Monkey King RC are these extremely handy parts boxes.

Get your small parts organised! 

Ideal for washers, screws, shims, small spare parts etc etc.

28 compartments - 105 x 170 x 25mm
Individual Boxes - 20 x 24 x 22mm

Also available 56 compartment version 

From Monkey King RC are these extremely handy parts boxes.

Get your small parts organised! 

Ideal for washers, screws, shims, small spare parts etc etc.

56 compartments - 208 x 170 x 25mm
Individual Boxes - 20 x 24 x 22mm

Check out the other 28 compartment box too

Our Setup System has been redesigned to give r/c racers accurate measurements for their 1/10 on road chassis's. We improved the look and made it even more lightweight. This time we incorporated bearings to keep everything smooth so the friction of your setup surface will not prevent the setup system from getting an accurate measurement.

Feature:

• For: 1:10 EP/GP Cars
• Material: Aluminum
• Color: Red
• Measures: Camber, toe, steering angle and caster
• Fully ball-bearing equipped set-up stands
• Ultra-smooth, ultra-precise movement and operation
• CNC machined aluminum

Include:

• CNC-Machined Alloy Side Plates (4 pcs)
• CNC-Machined Alloy Camber Gauges (4 pcs)
• Toe-in Gauge (1 pc)
• Camber Gauges Screws (4 pcs)
• M3 x 8mm Head Screws (16 pcs)
• 3 x 8 x 4mm Bearings (16 pcs)
• Wheel Nuts (4 pcs)
• User manual

Our Setup System has been redesigned to give r/c racers accurate measurements for their 1/10 on road chassis's. We improved the look and made it even more lightweight. This time we incorporated bearings to keep everything smooth so the friction of your setup surface will not prevent the setup system from getting an accurate measurement.

Feature:

• For: 1:10 EP/GP Cars
• Material: Aluminum
• Color: Black
• Measures: Camber, toe, steering angle and caster
• Fully ball-bearing equipped set-up stands
• Ultra-smooth, ultra-precise movement and operation
• CNC machined aluminum

Include:

• CNC-Machined Alloy Side Plates (4 pcs)
• CNC-Machined Alloy Camber Gauges (4 pcs)
• Toe-in Gauge (1 pc)
• Camber Gauges Screws (4 pcs)
• M3 x 8mm Head Screws (16 pcs)
• 3 x 8 x 4mm Bearings (16 pcs)
• Wheel Nuts (4 pcs)
• User manual

Neatly organise your pitspace with this Atsushi Hara limited edition setup station tray with tailored slots for Momentum series products:

Tweak wheel #MMT-018
Setup System V2 #MMT-026
Droop Gauge V2 #MMT-025

(TRAY ONLY! NO SETUP KIT)

Feature:

• For: Pit Space Organisation (Don't fit YT-0140)
• Material: Aluminum
• Color: Black/Purple

Include:

• Setup Station Tray (1 pc)

Organize your pit table neatly with this Mini-Z Multi Function Tool Stand! House not only your tools, but also keep small parts organized with the compartment infront of the tools!

TOOLS NOT INCLUDED

Feature:

• For: Car Building (YT-0136  YT-0210)
• Material: Aluminum
• Color: Black
• CNC Machined

Specification:

• Stand Measurement: L 8.8 X W 6.5 X H 1 (1.8) cm
• Hole : Diameter 14.5 mm x7 pcs
• Weight : 110g

Include:

• Aluminum Mini Tool Wrench Stand (1 pc)

FEATURES:

• Universal hard case suitable for almost all wheel type radios
• Including universal foam inlay
• Measure: 350x250x150 mm
• Inner measure: 320x220x130 mm
• Including carrying strap

Nice quality EDS pit towel.

Are you always stressing about missing the important screws/parts when tuning up your RC Cars/Helicopters?Why don't you get our brand new Yeah Racing (#YA-0194) Multi-Purpose Mini Box! It definitely helps to tidy up the screws/parts storage ideally. It provides 6 partitions therefore you can store the screws/parts in a more convenient way. It is also small in size so you can tune the RC while in race track or even on your desktop without losing your screws/parts.

Feature:

• For: screws/small parts storage
• Material: Plastic
• Color: Black

Specification:

• Length: Approx. 86mm
• Width: Approx. 55mm
• Height: Approx. 20mm

Include:

• Multi-Purpose Mini-Box (1 Pc)

FASTRAX PARTS STORAGE CASE 200MM X 135MM (15 SECTIONS)

Keep your parts organised with this handy storage box from Fastrax.