Hobbywing - XeRun XR10 Pro V4 - 160 Amp - Brushless ESC - HW30112600

Product Details

• High Power Output
  
  Continuous current of 160A and peak current of up to 1200A guarantees a stable and high power output during competitions.
  
  Special Design for Top Racing
  
  Reliable hardware combined with intelligent software (containing 10 common select-to-use profiles)
  creates an ideal power solution to 1/10th scale top touring car, Pan car and buggy racing.
  
  Programming / Upgrading / Data reading wirelessly
  
  With Hobbywing’s “WiFi Express” module and iPhone or an Android phone (with the HOBBYWING WiFi Link software installed), the user can remotely program parameters, upgrade firmware and check relevant data of the ESC without leaving the control stand.
  
  Adjustable Throttle & Brake PWM Frequencies
  
  Independent and adjustable throttle & brake PWM frequencies guarantee precise and accurate
  throttle and brake control for all classes of competitions (esp. the Stock class).
  
  Efficient Heat Dissipating System
  
  The aluminum casing and reticular heat sink combined with the HOBBYWING patented
  copper heat-conductive plates which are attached to the MOSFET board allows the internal
  heat to be quickly transferred to the heat sink for dissipation. With the high-performing detachable
  cooling fan, a highly reliable heat transfer system for maximum cooling is accomplished.
  
  High current/voltage BEC
  
  The built-in switch mode BEC with a maximum output of 8A and voltage adjustable
  between 6V and 7.4V allows the user to use various high voltage servos.
  
  Separate Programming/Fan Port
  
  The separate PRG/FAN port on the ESC can power an external fan to maximize cooling performance or connect the ESC to a LCD program box or WiFi module for ESC programming.
  
  Built-in Electronic Switch
  
  The internal electronic switch with a lifespan of over 50000 on/off cycles completely solves the problems like stuck reed, rusted contact points, and automatic shutdown conventional mechanical switches often have.
  
  Innovative data-logging Function
  
  This ESC features the data-logging function which can record the maximum ESC/motor temperature, RPM and etc. in
  real time and allows the user to analyze the recorded data via a the LCD program box or WiFi module after each use.
  
  Specification
  
  
  Cont./Peak Current - 160A / 1200A
  
  BEC Voltage/Current - 6V/7.4V,4A
  
  BEC Voltage Regulation - Switch Mode
  
  Fan is Powered by - Powered by the BEC (prolongs the service life of the fan)
  
  Fan shroud - Yes
  
  Fan Speed - High
  
  Remote Off - Enabled/Disabled Switchable
  
  (Motor) Drive Mode - Full Sensored/ Sensored or Sensorless Hybrid
  
  COAST - Switchable
  
  PWM Drive Frequency - 0-20% Adjustable
  
  Brake Frequency - 1K/2K/4K/8K/12K/16K Adjustable
  
  Brake Mode - 0.5K/1K/2K/4K Adjustable
  
  Boost Timing Activation - Linear/Traditional/Hybrid Adjustable
  
  RPM/Auto Adjustable
  
  Input Wires - Black-13AWG-200mm*2
  
  Output Wires - Black-13AWG-200mm*3
  
  Input Connectors - No
  
  Output Connectors - No
  
  ESC Programing via
  
  SET Button on ESC - Not Supported
  
  LED Program Box - Not Supported
  
  LCD Program Box - Supported
  
  WiFi Module - Supported
  
  Programming Port - Separate
  
  Firmware Upgrade - Supported
  
  Size - 37.5X31.6X31.6mm
  
  Weight - 95g
  
  Motors - SL BL Motors / SD BL Motors
  
  Vehicles - 1/10th Touring Car/Buggy/Top Racing, 1/10th Drift Car/F1, 1/10th & 1/8th Crawler
  
  KV Rating/T/Count - 2S LiPo/6S NiMH: (Touring Car) T≥3.5T, (Buggy) T≥4.5T.
  
  3S LiPo/9S NiMH: (Touring Car) T≥6.5T, (Buggy) T≥8.5T.