{"product_id":"vps08351","title":"Vanquish - Vanquish Currie Portal F9 SCX10-II Front Axle Clr - VPS08351","description":"\u003cdiv\u003eCurrie F9 Portal Front Axle for SCX10-II based vehicles\u003c\/div\u003e\u003cdiv\u003e \u003c\/div\u003e\u003cdiv\u003eThe F9 Portal axles create extreme amounts of ground clearance under the center of your axle, increasing the clearance by 1\/2\"+ (13mm). This provides the equivalent of a tire over 1 inch taller than what is on your vehicle. The advantage of the Vanquish Currie F9 Portals is the gear reduction inside the portal (1.67:1) which can be adjusted with optional gear sets (1.4:1 Overdrive). By adding reduction at the portal, less torque is transferred through the other upstream components in the drivetrain. These axles are a direct replacement to any Axial AR44 axle, using all stock links.\u003c\/div\u003e\u003cdiv\u003eThese axles come with all parts needed to assemble a full front axle.\u003c\/div\u003e\u003cdiv\u003e \u003c\/div\u003e\u003cdiv\u003eFeatures\u003c\/div\u003e\u003cdiv\u003e• Portal box built into the included knuckle with bolt on high steer arm for double shear mounting\u003c\/div\u003e\u003cdiv\u003e• Gear reduction in the portal of 1.67:1 (18\/30), Optional Overdrive Ratio of 1.4:1 (20\/28) recommended for use in front axle only.\u003c\/div\u003e\u003cdiv\u003e• Included Vanquish AR44 machined gear set\u003c\/div\u003e\u003cdiv\u003e• Overall axle reduction of 6.26:1 with stock portal ratio\u003c\/div\u003e\u003cdiv\u003e• 13mm increase in ground clearance\u003c\/div\u003e\u003cdiv\u003e• Specifically design offset C-hubs is machined into the housing for strength, durability, clearance and scale appearance\u003c\/div\u003e\u003cdiv\u003e• Hex to hex width of 7.66 inches, only roughly 5mm wider than a stock AR44 axle with a narrow hex\u003c\/div\u003e\u003cdiv\u003e• Replaceable Chromoly threaded inserts used at knuckle and C-hub to ensure a stripped thread doesn't ruin your investment\u003c\/div\u003e\u003cdiv\u003e• Brass knuckle bushing from the AR60 axles are used in place of SCX10-II sized for more durability.\u003c\/div\u003e\u003cdiv\u003e• Chromoly AR60 size VVD axle shafts come preassembled\u003c\/div\u003e\u003cdiv\u003e• Chromoly stub shafts with 6mm design at the drive pin which tapers down to a 5mm thread for ultimate strength\u003c\/div\u003e\u003cdiv\u003e• Chromoly spool\u003c\/div\u003e\u003cdiv\u003e• Aluminum 12mm hex with set screw\u003c\/div\u003e\u003cdiv\u003e• Compatible with stock SCX10-II Chassis mounted servo or F9 Servo on axle mount\u003c\/div\u003e\u003cdiv\u003e• Uses all SCX10-II linkage\u003c\/div\u003e\u003cdiv\u003e• Adjustable steering stop integrated into knuckle\u003c\/div\u003e\u003cdiv\u003e• Complete Fast Eddy Bearings kit\u003c\/div\u003e\u003cdiv\u003e• Licensed by Currie Enterprises\u003c\/div\u003e\u003cdiv\u003e• Comes with One Piece Bearing Retainers (Patent Pending)\u003c\/div\u003e\u003cdiv\u003e• Double shear shock mounts\u003c\/div\u003e\u003cdiv\u003e• Integrated Panhard mount\u003c\/div\u003e\u003cdiv\u003e• Upper link mounts built into third member\u003c\/div\u003e\u003cdiv\u003e• Increased upper link clearance for more suspension up travel ability.\u003c\/div\u003e\u003cdiv\u003e \u003c\/div\u003e\u003cdiv\u003eRequires the use of a 350 SLW hub or greater on Vanquish 1.9 wheels, Incision wheels will require a #4 or greater. Other wheel manufacturers offsets will vary. Axles must be used in pairs, you cannot run a front portal axle without a rear and vice versa. This product is not compatible with the VS4-10 Pro, or in combination with the VFD transmission.\u003c\/div\u003e","brand":"Vanquish","offers":[{"title":"Default Title","offer_id":54028526256475,"sku":"VPS08351","price":329.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0856\/8140\/6299\/files\/vps08351_1.jpg?v=1789092382","url":"https:\/\/frostymodels.com\/products\/vps08351","provider":"FROSTY MODELS SKEGNESS","version":"1.0","type":"link"}